Compare“10mm LED Yellow Transparent 20mA 0.75W Ultra Bright Round LED Light Emitting Diode Lamp” has been added to the compare list
“10mm LED Yellow Transparent 20mA 0.75W Ultra Bright Round LED Light Emitting Diode Lamp” was added to the compare list
-
- Non-toxic, solvent-free, non-polluting, non-corrosive, high temperature -60 degrees Celsius -250 degrees Celsius curing silicone rubber at room temperature, with very good insulation and anti-arc performance for electrical and electronic insulation and bonding, storage 12 months.
- Features:
- 100% brand new and high quality
- Extensive use, The operation is simple
- Has the waterproof, moistureproof, Damping effect, etc
- Non-toxic, no solvent, no pollution, no corrosion, aging resistance
- It has excellent electrical insulation and arc resistance performances
- Color: white
- Temperature resistance: -60~+250C
- Cure time: 12~24 hours
- Use: Dedicated to electrical and electronic insulation, sealing and adhesive
- Package include:1pc 100mL Glue
₨ 250
-
- Wires Color: Black & Red
- Power: 250v 0.5A AC/DC
- Wire Length: 9cm
- Outer diameter:1.4mm
- Two ends with tin-plated
- Quantity: 50PCS RED and 50pcs Black
- Application: Bread Board , LED Bulb Chips
₨ 95
-
- Power: 100W
- Voltage: High Voltage
- Current: 1500mA
- Serial and parallel circuit:
- Size: 173*95mm
- Number of crystals: 300pcs
- Lumens: 10000LM
- Aluminum substrate thickness: 1mm (0.06in)
- Thermal conductivity of aluminum substrate: 2.0W/(m·K)
- Application place: Flood light
- Conditions of use: radiator required
- Chip temperature does not exceed 65℃
₨ 390
-
- Mode: 0.75W bullet shape white LED light
- Color: Blue
- Pin: 18mm
- Light flux: 45-55lm
- Angles: 8-10 degrees
- Voltage: 3.0V
- Chip: 24MIL chip
- Current: 150mA (recommended for 80-100mA)
- Material: epoxy resin
- life span: 5-100,000 hours
₨ 10
-
- Lens Size: 10mm Diameter
- Lens:Transparent Lens
- Emitting Color: White Flash/Red Flash/Green Flash/BlueFlash/Yellow Flash/ RGB Fast Flash / RGB Slow Flash
- Viewing Angle: 30 Degree (Clear Lens) | 20 Degree (ColorLens)
- Voltage : 3.0-3.4 V
- Forward Voltage: 2.0-2.2V (Red/ Yellow) | 3.0-3.2V(White/ Green/ Blue/ RGB)
- Current: 20mA
- Frequency: 1.5HZ
- Flicker Frequency: 90 Times / Minutes (for SingleColor,not RGB)
- Polarity: Anode (Longer Part) | Cathode (Shorter Part)
₨ 13
-
- Mode: 0.75W bullet shape white LED light
- Color: Green
- Pin: 18mm
- Light flux: 45-55lm
- Angles: 8-10 degrees
- Voltage: 3.0V
- Chip: 24MIL chip
- Current: 150mA (recommended for 80-100mA)
- Material: epoxy resin
- life span: 5-100,000 hours
₨ 10
-
- Mode: 0.75W bullet shape white LED light
- Color: Red
- Pin: 18mm
- Light flux: 45-55lm
- Angles: 8-10 degrees
- Voltage: 3.0V
- Chip: 24MIL chip
- Current: 150mA (recommended for 80-100mA)
- Material: epoxy resin
- life span: 5-100,000 hours
₨ 10
-
- Mode: 0.75W bullet shape white LED light
- Color: White
- Pin: 18mm
- Light flux: 45-55lm
- Angles: 8-10 degrees
- Voltage: 3.0V
- Chip: 24MIL chip
- Current: 150mA (recommended for 80-100mA)
- Material: epoxy resin
- life span: 5-100,000 hours
₨ 10
-
- Mode: 0.75W bullet shape white LED light
- Color: Yellow
- Pin: 18mm
- Light flux: 45-55lm
- Angles: 8-10 degrees
- Voltage: 3.0V
- Chip: 24MIL chip
- Current: 150mA (recommended for 80-100mA)
- Material: epoxy resin
- life span: 5-100,000 hours
₨ 10
-
- SMD LED Chip
- Shapes : Round
- Emitting color: Warm
- Lens colors : Water clear
- Working voltage: 3.0-3.4V
- Life Span :. 100,000 Hours
- With RoHS & CE Approved
- Beam angle :. 120 degrees
- Luminous Flux: 100-110LM (1W) ; 200-220LM
- color-rendering index: 60-80
- power: 1W
- Heat Sink:
- Diameter: about 20mm/16MM
- Color: white and black
- Thickness: about 1.3mm
- Surface treatment processes: anodizing
- Application: use for welding 1 piece LED beads (1W)
₨ 120
-
-
