-
1-8S 1S/2S/3S/4S Single 3.7V Lithium Battery Capacity Indicator Module 4.2V Display Electric Vehicle Battery Power Tester Li-ion
- 1. Using high-quality materials, the quality is guaranteed
- 2. Battery power display, select the corresponding pad to tin, you can detect the voltage of the battery pack corresponding to 1S-8S, which is very convenient.
- 3. Wide range of applications, 1S-8S lithium batteries, batteries with corresponding voltages can be used
- 4. The four-level power display is more intuitive
- 5. The appearance of the product is small and exquisite.
- Working voltage: 3-34V
- Working current: 5mA
- Working temperature: -20-50℃
- Voltage error 2%
₨ 215 -
12V–60V Battery Charge Level Indicator | LED Digital Voltmeter | Multi Voltage Tester
🔋 Dual Display System – Battery level + voltage shown together
🌈 8-Level Battery Indicator – Clear percentage (10% to Full)
📟 LED Digital Display – Bright, easy-to-read screen
⚡ Wide Voltage Support – Works from 12V to 60V systems
🔄 Auto Voltage Detection – Smart recognition of battery level
🛡 Reverse Polarity Protection – Safe even if connected wrong
🎯 High Accuracy (±1%) – Reliable and precise readings
⚙️ Low Power Consumption – Only 5–15mA usage
🔁 Fast Refresh Rate – Updates every 300ms
🧱 Durable ABS Body – Strong and long-lasting
🔧 Easy 2-Wire Installation – Simple direct battery connection₨ 290 -
3mm LDR Photo Light Sensitive Resistor Photoresistor
- Photoresistor
- Condition: New
- Maximum voltage: 150V-dc
- Maximum power consumption: 100mW
- Environment temperature: -30— +70°C
- Spectral peak: 540nm
- Bright resistance: 10-20K
- Dark resistance: 1M
- 10010:0.6
- Response time: rise 20ms
₨ 10 -
5528 LDR Photo Light Sensitive Resistor Photoresistor
- GL5528 5528 Photoresistor LDR Detecting Resistors Light-Dependent 5mm New
- Photoresistor
- Condition: New
- Maximum voltage: 150V-dc
- Maximum power consumption: 100mW
- Environment temperature: -30— +70°C
- Spectral peak: 540nm
- Bright resistance: 10-20K
- Dark resistance: 1M
- 10010:0.6
- Response time: rise 20ms
₨ 15 -
BT-168D Battery Tester Universal Battery Volt Tester for AA /AAA/C/D/9V/1.5V Button Cell
- Type : Battery Tester
- Material: ABS
- Color: Black
- Tests 1.5V miniature cells
- Checks power level of all 1.5V & 9V batteries
- Three result: red=replace, yellow=low power, green=good
- Easy to read, colour coded meter indicates power level
- Universal Button Battery Checker Tester AA AAA C D 9V
- Don\’t Which Batteries to Keep and Which to throw Away
- Place your battery between the two points of the battery tester and the easy-to-read display will tell you instantly whether you have a dud or if you can eke out another few minutes of battery life
₨ 490 -
Digital Food Thermometer For Meat Kitchen Cooking Water Milk Food Probe Temperature Meter BBQ Electronic Oven Tool
-
✅ Temperature range: -50°C to 300°C (-58°F to 572°F)
-
✅ Fast reading in 3–5 seconds
-
✅ 304 stainless steel food-safe probe
-
✅ Large, bright LED display
-
✅ °C/°F unit conversion with one button
-
✅ Auto shutoff after 15 minutes
-
✅ Lightweight, eco-friendly ABS plastic body
-
✅ Probe length: 15cm for safe handling
-
✅ Total length: 24cm – compact and portable
-
✅ Simple one-button operation
-
✅ Uses 1x LR44 button cell (not included)
-
✅ Ideal for meat, baking, coffee, frying, and more
-
✅ BPA-free and corrosion-resistant materials
-
✅ Includes protective storage tube
-
✅ Trusted quality from Shehzad Electronics
₨ 420 -
-
Digital Voltmeter DC 100V 10A Voltmeter Ammeter
- Working voltage:4.5-30V DC
- Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning
- Working current:=20mA
- Display: 0.28″ Two color blue and red
- Measuring range: DC 0-100V 0-10A
- Minimum resolution (V): 0.1V
- Refresh rate: =100mS / times
- Measure accuracy: 1% (± 1 digit)
- Minimum resolution (A): 0.01A
- Operating temperature: -15 to 70° c
- Working pressure: 80 to 106 kPa
- size :48×29×22 mm
₨ 375 -
DT3 Data Cable Tester – Smart Cable Diagnostic Tool
🔍 Fast Cable Diagnosis – Instantly checks whether your cable is working or faulty in seconds
💡 LED Indicator System – Clear colorful light signals show cable status at a glance
🔌 Wide Compatibility – Supports USB, Type-C, Micro USB & Lightning cables
⚡ Charging Line Check – Detects issues in VCC & GND for charging problems
📊 Data Line Testing – Identifies faults in D+ and D− data transmission
🧠 Smart Type-C Analysis – Special CC detection for advanced Type-C cables
🧳 Ultra Compact Design – Small, lightweight, and easy to carry anywhere
🛠️ Plug & Play Operation – No setup needed, just connect and test
⏱️ Time Saving Tool – Quickly finds faulty cables without guesswork
🚀 Professional Grade Utility – Perfect for repair shops and technicians for accurate diagnostics
₨ 570 -
Dual USB Current Voltage Charger Detector battery Tester 3V to 9V Voltmeter Ammeter
- IN – Contact with chargers
- OUT – Contact with USB of Cables
- Voltage : 3-9 V +/-1%
- Current : 0-5 A +/-1% (0-3A is better)
- Power : 15 W
- Model: KWS-10VA
- Material: Plastic
- Color: Black
- Size: 61*28*15mm
- Net weight: 22g
₨ 560 -
Hall Effect Sensor Module 3144E with LM393 – Arduino Compatible
-
High Precision Magnetic Detection
-
Compact Size: 32mm × 14mm
-
Operating Voltage: DC 3.3V – 5.5V
-
Control Distance: < 1 cm
-
High Temperature Resistance: up to 105°C
-
Comparator Output (LM393) for stable signal
-
Output Current Capability: up to 16mA
-
Single Digital Signal Output
-
Low-Level Effective Output
-
Sensitivity Adjustable
-
Real-Time Magnetic Field Detection
-
Direct MCU / Arduino Interface
-
Power Indicator LED
-
Output Status Indicator LED
-
3mm Mounting Screw Holes for Easy Installation
₨ 160 -
-
HC-SR04 Ultrasonic Distance Sensor – Accurate & Reliable Distance Measurement
🔹 High Precision Measurement – Accuracy up to ±0.3cm
🔹 Wide Detection Range – Measures distances from 2cm to 450cm
🔹 40kHz Ultrasonic Transducer – Reliable and interference-resistant sensing
🔹 Low Power Consumption – Draws less than 2mA in standby
🔹 Narrow Beam Angle – ≤ 15° for focused and accurate detection
🔹 Fast Response Time – Real-time distance updates
🔹 TTL Signal Output – 5V logic compatible
🔹 Simple 4-Pin Connection – Easy integration into any project
🔹 Compact & Durable PCB – Long-lasting performance₨ 199 -
HC-SR501 HC SR501 PIR Human Motion Infrared Detector Sensor Module
- PIR Sensor – Proximity IR Sensor
- Input Voltage: DC 4.5-20V
- Static current: 50uA
- Output signal: 0,3V or 5V (Output high when motion detected)
- Sentry Angle: 110 degree
- Sentry Distance: max 7 m
- Shunt for setting overide trigger: H – Yes, L – No
- The Sensitivity and Holding Time Can be Adjusted
- Blockade time: 2.5s (Default)
- Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
- Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S)
₨ 210