-
3.5mm Stereo Male to Male Audio Cable – 1 Meter | Aux Cable for Speaker, Mobile, PC, MP3
-
✅ 100% Brand New & High Quality
-
✅ Color: Black
-
✅ Length: 1 Meter (3.3 feet)
-
✅ Connector Type: 3.5mm Stereo – Male to Male
-
✅ Outer Diameter: 3.0mm – flexible and easy to handle
-
✅ Gender: Male to Male
-
✅ Clear Stereo Sound – low noise and high fidelity
-
✅ Plug & Play – no drivers or setup needed
₨ 65 -
-
10PCS 2W 2.2 Ohm High Power Resistors
✅ Resistance: 2.2 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
12V DC Ultra-Bright LED Chip with Heat Sink | 18 SMD LEDs | 39x39mm
-
💡 Voltage: 12V DC
-
🔆 LED Type: 2835 SMD
-
💡 LED Count: 18 LEDs
-
📏 Dimensions: 39mm x 39mm
-
🌡️ Heat Sink Installed: Ensures better thermal management
-
🔧 Built-in Resistor: For direct connection to 12V DC power
-
🔋 Energy Efficient: Bright light with minimal power consumption
-
🧩 Ready to Use: Easy to integrate into various lighting applications
-
🛠️ Durable Design: Long lifespan and reliable performance
₨ 45 -
-
BD139 NPN Transistor
-
Type: NPN Transistor (BD139)
-
Maximum Collector Current (Ic): 1.5A
-
Maximum Collector-Emitter Voltage (Vce): 80V
-
Power Dissipation: 12.5W (with proper heat sinking)
-
High Gain: Ideal for power amplification applications.
-
TO-126 Package: Ensures efficient heat dissipation.
-
Applications: Audio amplification, power switching, motor control, and general-purpose electronics
₨ 11BD139 NPN Transistor
₨ 11 -
-
25V 330uF Electrolytic Polar Capacitor High-Quality
-
Capacitance: 330uF
-
Voltage Rating: 25V
-
Type: Electrolytic Capacitor
-
Polarity: Polarized (marked with a negative terminal)
-
Durability: Reliable and long-lasting performance
-
Applications: Power supplies, audio equipment, amplifiers, timing circuits, etc.
-
Brand: Shehzad Electronics
₨ 9 -
-
1K Ohm 1/4W Resistors (Pack of 50) – Perfect for All Electronics Projects
-
Resistance Value: 1K Ohm (1000 Ohms)
-
Quantity: Pack of 50
-
Type: Carbon Film Resistors
-
Tolerance: ±5%
-
Power Rating: 0.25W (1/4 Watt)
-
Reliable Performance: Ensures consistent operation across a wide range of projects.
-
Applications: Suitable for breadboarding, prototyping, and various electronic circuits.
₨ 45 -
-
5X Magnifier Handheld 50mm Magnifying Glass MG6B-3 with 2 LED Lights Handle
- Supported Battery: 3x AAA (not included)
- Magnification: 5x Zoom
- Light: 2x LED
- Lens Diameter: 50mm
- Size: 158 x 71 x 25 mm
- Weight: 109g Apx.
- Model: MG6B-3
- Applications: Industrial Purposes, Circuit Board and Printing, Gardening, Coin and Stamp, Education, Geography, Home and Office, etc.
₨ 440 -
12V DC 10AMP 5 PIN SPDT RELAY
- Material: Plastic and Metal
- Color: Black
- Parameters: 12V 10A
- Size: 1.9cmx1.5cmx1.5 cm
- Quantity: 1 Pcs
- Coil Current 30mA
₨ 55 -
10 Set TO-220 (D313) Silicone Thermal Pad Sheet & Insulating Bushing Washer Kit – High Transistor Thermal Pad Insulator
- 🔴 TO-220 Package Fit: Precision-stamped design perfectly matches standard TO-220 transistors, MOSFETs, and power ICs.
- 🟠 Complete 10-Set Kit: Includes 10 silicone thermal insulating pads and 10 matching plastic isolation bushing washers.
- 🟡 Efficient Thermal Transfer: Fills microscopic surface gaps between the semiconductor and metal heatsink for optimal heat dissipation.
- 🟢 Total Electrical Isolation: Prevents direct electrical contact between the transistor tab and the heatsink to prevent short circuits.
- 🔵 Screw Hole Bushing Protection: Plastic washers insulate the mounting screw from the internal metal tab of the TO-220 component.
- 🟣 High Temperature Resistant: Flexible silicone withstands high operating temperatures under continuous power loads.
- ⚪ Non-Messy Alternative: Eliminates the messy, uneven application associated with traditional thermal grease paste.
- 🟤 Vibration & Shock Damping: Soft silicone construction absorbs mechanical shocks, reducing mechanical stress on component leads.
- 🟢 Wide Equipment Compatibility: Essential for power supplies, audio amplifiers, LCD TVs, LED lighting drivers, and telecom hubs.
- 🟡 Easy DIY Installation: Quick, drop-in placement for hassle-free circuit board mounting, repairs, and custom hardware builds.
₨ 40 -
BMS 3S 12V 10A Lithium Battery Protection Board – Smart Balancing, Overcharge & Short-Circuit Safety by Shehzad Electronics
- 🔋 Lithium Battery Safety – Protects against overcharge & discharge.
- ⚡ 10A High Current – Handles powerful loads with ease.
- 🛡️ Short-Circuit Protection – MOSFET-based safety design.
- 🔧 Easy Wiring Setup – Clear B+, B1, B2, B− labels.
- 📏 Compact PCB Board – Fits tight enclosures.
- 🔄 Cell Balancing – Equalizes voltage across cells.
- 🕒 Extended Battery Life – Improves durability.
- 🌍 Versatile Applications – Perfect for solar, e-bikes, DIY packs.
- 🧩 BT-C6 Chipset – Precision monitoring & control.
- 🏷️ Shehzad Electronics Quality – Trusted brand reliability.
₨ 185 -
50V 10uF Non-Polarized Electrolytic Audio Capacitor – High-Fidelity Bi-Polar Crossover Component
Key Features & Performance Specs
-
True Bi-Polar Design: No polarity (+/-) constraints! Ideal for Audio Coupling and Speaker Crossover networks where signals reverse direction. -
Pure Signal Transparency: Minimal ESR (Equivalent Series Resistance) ensures your highs stay crisp and your lows remain punchy without “muddying” the mid-range. -
High Voltage Stability: Rated at 50V 10uF, providing a safe overhead for high-output power amplifiers and home theater systems. -
Audiophile Aesthetics: The sleek Gold & Black casing isn’t just for show—it represents a specialized internal construction designed for low-noise performance. -
Universal Compatibility: Perfect for DIY Audio Projects, Vintage Amp Restoration, and Passive Crossover Repairs.
₨ 15 -
