-
Stripboard Veroboard Prototype 6.5 x 14.5cm Vero Board
- 6.5cm x 14.5cm Stripboard (Vero) for DIY and prototyping.
- Material: Single Side Copper PCB
- Hole Diameter: ~1mm
- Hole Pitch: 2.54mm
- Size: 65cm x 14.5cm
- Dots 24 x 56
₨ 100 -
Mini DC Motor DC 3V 6V 12V 24V 35V PWM Speed Controller 90W 5A DC Motor Speed Control Switch LED Dimmer
- Operating Voltage: DC3V-35V
- Control Power: 90W (maximum)
- Quiescent Current: 0.015A (standby)
- PWM Duty Cycle: 1% -100%
- PWM Frequency: 10khz
- Size: 24*30mm/0.94*1.18″
₨ 250 -
3.7V DC Motor YX-380 High Torque Mini Motor 7500 Rpm Dual Brush Motor
- Voltage: DC 3.7V
- Speed: 7500RPM
- Body height: 38MM
- Shaft diameter: 2.2MM
- Output shaft length:11.7MM
₨ 195 -
30W PD QC 3.0 Fast Charging Power Bank Module | 12V Battery Input | Dual USB + Type-C DIY Step-Down Circuit Board
-
⚡ 30W Ultra-Fast Output: Delivers high-wattage charging to juice up modern devices in a fraction of the time.
-
🔋 12V Optimized Input: Specifically designed for 12V systems, ideal for 3S Li-ion setups or car battery conversions.
-
🔌 Triple Port Versatility: Features Dual USB-A outputs and a high-speed USB Type-C input interface.
-
🎯 Multi-Protocol Support: Fully compatible with PD 3.0, QC 3.0, Huawei FCP, and Samsung AFC.
-
📊 Smart LED Indicators: Integrated 4-level LED display provides instant visual feedback on battery capacity.
-
🛡️ Industrial-Grade Protection: Built-in safeguards against over-voltage, short-circuits, and thermal runaway.
-
🌀 High-Efficiency Cooling: Uses a premium toroidal inductor to minimize energy loss and heat build-up.
-
🛠️ DIY Ready Design: Compact PCB with pre-drilled mounting holes for easy installation into custom cases.
₨ 395 -
-
Mini Submersible Water Pump | 3V–5V DC | Silent Micro Motor for Arduino, DIY, Fountain, Aquarium
-
✅ Operating Voltage: 3V–5V DC
-
✅ Low Noise: Silent operation – ideal for home or desk projects
-
✅ Compact Size: 42.6mm x 22.7mm x 23.9mm
-
✅ Water Outlet Diameter: 7.45mm
-
✅ Material: High-quality plastic body
-
✅ Waterproof Design: Fully submersible
-
✅ Wire Type: 2-wire DC (easy to connect)
-
✅ Current Draw: ~100mA @ 3V, ~180mA @ 5V (approx.)
-
✅ Applications: Mini fountains, cooling systems, fish tanks, hydroponics, DIY Arduino or Raspberry Pi projects
₨ 220 -
-
Power Bank Module – 5V 2A Dual USB Charging Board
-
Dual USB Ports: Charge two devices simultaneously with a total output of 5V/2A.
-
Intelligent Current Distribution: Automatically balances power between ports for optimal charging.
-
Wide Input Range: Supports 3.7V to 5V input, compatible with 18650 and Li-Po batteries.
-
Fast & Smart Charging: Auto-detects device requirements for efficient charging protocols.
-
Advanced Safety Protections: Overcharge, over-discharge, and short-circuit safeguards.
-
Stable Voltage Output: Maintains voltage within ±5% for device safety.
-
High-Quality Construction: RoHS-certified, high-temperature resistant PCB ensures durability.
-
Corrosion-Resistant Ports: Gold-plated USB connectors for stable and long-lasting connections.
-
Compact Form Factor: Small footprint ideal for tight spaces.
-
High Conversion Efficiency: Over 85% power conversion efficiency for minimal energy loss.
₨ 120 -
-
NE5532 Low Noise Dual Operational Amplifier IC – High-Precision Audio Op-Amp for Audio & Signal Processing
-
✅ Low-noise, high-precision dual operational amplifier
-
✅ Wide supply voltage range: ±3V to ±20V
-
✅ High slew rate (0.3V/µs) and wide bandwidth
-
✅ Low total harmonic distortion (THD), ideal for audio applications
-
✅ High input impedance and low output impedance
-
✅ Available in 8-pin DIP and SOIC package options
-
✅ Perfect for audio pre-amplifiers, mixers, and signal processing circuits
₨ 50 -
-
Low Pass Filter PCB – Precision Bass Management for Pro Audio & DIY Projects
✅ Optimized for 12V Systems – Perfect for car audio and portable applications
✅ Studio-Grade Filtering – Sharp cutoff slope for precise frequency control
✅ Plug-and-Play Design – Pre-wired terminals for quick installation
✅ Multi-Layer Protection – Built-in safeguards against voltage spikes
✅ Compact 50x50mm Size – Fits in tight amplifier enclosures₨ 38 -
TDA2050 High-Power Audio Amplifier IC – Crystal Clear Sound with Superior Output!
-
High Output Power: Delivers up to 35W of continuous output power into an 8Ω speaker at ±18V, making it perfect for driving mid-sized speakers.
-
Low Distortion: Offers a low total harmonic distortion (THD) of around 0.1%, providing crystal-clear, high-quality audio output.
-
Wide Voltage Range: Operates within a wide voltage range of ±14V to ±30V, offering flexibility for different audio system designs.
-
Thermal and Overload Protection: Includes built-in thermal shutdown, short-circuit protection, and overload protection, ensuring the IC’s reliability in high-power applications.
-
High Efficiency: Designed to minimize power loss, making it an efficient choice for audio amplification applications, particularly in space-constrained or battery-powered devices.
-
Compact and Robust Package: Available in a TO-220 package, ideal for mounting to a heat sink for effective thermal management.
₨ 70 -
-
6mm Diameter, 1 Meter Length (Transparent) High-Quality Heat Shrink Tube
-
Length: 1 meter
-
Diameter: 6mm
-
Color: Transparent
-
Material: Flame-retardant, flexible, and durable.
₨ 49 -
-
5mm Diameter, 1 Meter Length (Red) High-Quality Heat Shrink Tube
-
Length: 1 meter
-
Diameter: 5mm
-
Color: Red
-
Material: Flame-retardant, flexible, and durable.
₨ 31 -
-
5mm Diameter, 1 Meter Length (Black) High-Quality Heat Shrink Tube
-
Length: 1 meter
-
Diameter: 5mm
-
Color: Black
-
Material: Flame-retardant, flexible, and durable.
₨ 27 -











