-
3-Pin Red Round Rocker Switch ON/OFF SPST 10A 250V – Red LED Indicator
-
✅ Type: Round Rocker Switch
-
✅ Function: ON/OFF (SPST – Single Pole Single Throw)
-
✅ Terminals: 3-pin configuration
-
✅ Voltage Rating: 10A at 250V AC / 20A at 125V AC
-
✅ LED Indicator: Built-in red LED illuminates when switch is ON
-
✅ Mounting Hole Size: Fits standard 20mm panel holes
-
✅ Durable Design: High-quality plastic housing and copper terminals
-
✅ Easy Installation: Solder or quick-connect terminals
-
✅ Application: Ideal for automotive, marine, industrial, and DIY projects
₨ 30 -
-
IR Infrared Obstacle Avoidance Sensor Module | Adjustable Sensitivity | 3-Pin Interface
- 📡 Infrared Obstacle Detection: Uses IR transmitter and receiver to detect objects
- 🔧 Adjustable Sensitivity: Built-in potentiometer for tuning detection range
- 🔌 Easy Connection: 3-pin interface (VCC, GND, OUT) for quick integration
- ⚙️ Voltage: 3.3V – 5V DC
- 📏 Range: Approx. 2cm to 30cm (adjustable)
- 💡 Indicator LEDs: Power and obstacle detection indicators onboard
- 🧠 Compatible With: Arduino, Raspberry Pi, Robotics kits
- 🛠️ Compact Design: Lightweight and easy to mount
₨ 130 -
3S 4A 12.6V Lithium Battery Charger Module | USB Type-C to 12.6V Boost Converter for 18650 Li-Ion LiPo Batteries
-
🔋 Supports 3S Li-Ion / LiPo Battery Packs (12.6V charging output)
-
⚡ Input Voltage: DC 3V to 6V (recommended 3.7V–5V)
-
🔌 USB Type-C Input Port for convenient and universal charging
-
📈 High-Efficiency Boost Converter with switching frequency up to 1MHz
-
🧠 Quasi-CV Mode: Compensates for battery and trace resistance
-
🔄 Automatic Recharge when battery voltage drops
-
🔐 Built-in Protection: Over-voltage, short battery, and low-voltage input
-
💡 LED Indicators: “CR” for Charging, “OK” for Fully Charged or Constant Voltage Mode
-
🌡️ Wide Operating Temp: -40℃ to +85℃
-
🛠️ Compact Size: 39mm x 18mm x 6.3mm — ideal for tight DIY spaces
-
⚖️ Lightweight: Only 5g — perfect for portable use
₨ 195 -
-
12V DC Ultra-Bright LED Chip with Heat Sink | 18 SMD LEDs | 39x39mm
-
💡 Voltage: 12V DC
-
🔆 LED Type: 2835 SMD
-
💡 LED Count: 18 LEDs
-
📏 Dimensions: 39mm x 39mm
-
🌡️ Heat Sink Installed: Ensures better thermal management
-
🔧 Built-in Resistor: For direct connection to 12V DC power
-
🔋 Energy Efficient: Bright light with minimal power consumption
-
🧩 Ready to Use: Easy to integrate into various lighting applications
-
🛠️ Durable Design: Long lifespan and reliable performance
₨ 45 -
-
12V DC 120 SMD LED Panel Light 75x75mm – Ultra Bright with Heat Sink
-
🔋 Voltage: 12V DC
-
💡 LED Type: 120 SMD 2835 Bright Chips
-
📐 Size: 75mm x 75mm Compact Square Panel
-
🛠️ Heat Sink Installed: Prevents overheating
-
⚡ Resistors Installed: Ensures consistent power flow
-
🧲 Durable Build: Long-lasting and energy-efficient
-
🔌 Ready to Use: Comes with positive & negative wires
-
🔧 Ideal For: Emergency lights, solar lights, DIY lighting, home lighting setups
₨ 150 -
-
RS-775 12V DC High Torque Long Shaft Motor – 6000 RPM | Cooling Fan & Ball Bearing Installed
-
🔋 Voltage: 12V DC
-
⚙️ High Torque Motor – Powerful and energy-efficient
-
🌀 RPM: 6000 – Superfast speed for demanding applications
-
📏 Shaft Size: 78mm (length) x 7.8mm (diameter)
-
📐 Body Dimensions: 6.6cm x 4.4cm
-
🧊 Built-in Cooling Fan – Prevents overheating
-
⚖️ Ball Bearing Installed – Smooth and quiet operation
-
🔧 Ideal for: Air coolers, mini drill machines, RC projects, fans, DIY tools
₨ 575 -
-
12V DC High Torque Air Cooler Baleno Motor – Pure Copper | 3200 RPM | Dual Ball Bearing
-
🔋 Voltage: 12V DC
-
⚙️ High Torque Output – For enhanced cooling performance
-
🌀 RPM: 3200 – Delivers powerful airflow
-
🧵 Pure Copper Winding – Ensures long life & energy efficiency
-
⚖️ Dual Ball Bearings – Smooth, quiet, and durable operation
-
📏 Shaft Size: 56mm (length) x 7.9mm (diameter)
-
📐 Body Dimensions: 9.5cm x 7.1cm – Compact and sturdy
-
🔧 Ideal for: Air coolers, car fans, DIY cooling projects, etc.
₨ 1,430 -
-
4-Pin ON/OFF Rocker Switch 250V 16A – Durable & High Current Capacity (32x17x31mm)
-
⚡ High Power Rating – Handles up to 250V and 16A, perfect for demanding setups
-
🔘 Stable ON/OFF Function – Smooth rocker mechanism with tactile feedback
-
🔌 4-Pin Design – Ensures secure and versatile connectivity
-
📐 Size: 32 x 17 x 31 mm – Compact yet robust for easy installation
-
🎨 Stylish Blue Rocker – Aesthetic and functional design
-
🛠️ Ideal For: Power tools, appliances, extension cords, industrial controls
₨ 35 -
-
2-Position 6-Pin Toggle Slide Switch – Compact & Durable (24x7x19mm)
-
🔘 2-Position Operation – Slide to switch between two stable states
-
🔌 6-Pin Configuration – Easy to integrate into various circuit designs
-
📏 Compact Size – 24 x 7 x 19 mm, fits tight spaces perfectly
-
🛠️ Durable Build – Sturdy plastic and metal construction for long-lasting use
-
🔧 Easy Mounting – Comes with flanged holes for secure placement on panels or PCBs
-
💡 Wide Applications – Ideal for electronics projects, DIY circuits, robots, and prototyping
₨ 10 -
-
6-Pin Rocker Switch Black 250V 16A – 3 Position ON-OFF-ON | Heavy Duty | 33x26x35mm
-
Voltage & Current Rating: 250V AC, 16A
-
Switch Type: 3-position rocker switch (ON-OFF-ON)
-
Pin Configuration: 6 terminals for versatile connectivity
-
Body Color: Black with white markings for easy identification
-
Mounting Type: Snap-in panel mount
-
Dimensions: 33mm x 26mm x 35mm
-
Build Quality: Durable plastic housing with solid metal terminals
-
Applications: Ideal for reversing motors, power control systems, household appliances, and industrial equipment
₨ 60 -
-
Mini 2-Pin Round ON/OFF Rocker Switch – Durable & Compact
-
Type: Round Rocker Switch
-
Configuration: 2-pin ON/OFF
-
Quantity: 1 pieces per pack
-
Design: Compact and space-saving
-
Color: Red button with black casing
-
Mounting: Snap-fit round panel mount
-
Durability: Built for long-term use in low-voltage projects
-
Applications: Ideal for electronics, DIY circuits, automotive setups, and control panels
₨ 20 -
-
4-Pin Rocker ON/OFF Switch Heavy Duty 250V 16A – Red Illuminated | 31x25x35mm
-
Voltage & Current Rating: 250V AC, 16A
-
Design: Rocker style with ON/OFF marking (I/O)
-
Pins: 4 metal terminals for secure connections
-
Illumination: Red LED indicator when switched ON
-
Mounting: Snap-in panel mount
-
Material: High-quality plastic body with metal connectors
-
Dimensions: 31mm x 25mm x 35mm
-
Applications: Ideal for power tools, appliances, automotive circuits, and DIY electronics
₨ 40 -