-
2PCS 1.56 Inch Dome Tweeters 20W 4 Ohm Treble Audio Tweeter
- 100% Brand new and high quality
- Color: black
- Material composition: plastic PP
- Frequency: 5-20KHz
- Sensitivity: 91dB
- Maximum power: 20W
- Resistance: 4 ohm
- Framer diameter: 1.56 inch
- dome size: 0.6 inch
₨ 520 -
12V Battery Automatic Charging Cut Off Board | SK136 | Overcharge Protection | Smart Relay Control | SE Shehzad Electronics
- ⚡ Automatic Cut Off – Stops charging when battery is full.
- 🔋 Battery Protection – Prevents overcharging and extends lifespan.
- 🧩 High-Quality Components – LM358 IC, relay, transistors, diodes.
- 🔧 Easy Installation – Simple wiring for quick setup.
- 🌍 Universal Use – Works with most 12V batteries.
- 🛠️ DIY Friendly – Perfect for hobbyists and repair projects.
- 🏭 Professional Grade – Reliable for electronics labs and workshops.
- 💡 LED Indicators – Green/Red lights for charging status.
- 🔥 Heat-Resistant Design – Built for long-term durability.
- 🏷️ Shehzad Electronics Quality – Trusted brand for electronics tools.
₨ 210 -
1A Glass Tube Fuse 5x20mm 250V Quick Blow Fuses
- Dimension:5mm x 20 mm
- Operating Temperature:-40 – +125°C
- Fuction : Fast Blow
- Rated Voltage : 250V
- Material : Glass
- Color : Clear, Silver Tone
- Weight : 7g
₨ 6 -
3.5mm 4 Poles Stereo Audio Jack Plug Headphone Male Female Connector
- 100% brand new & good quality
- Use for microphone plug, earphone plug
- 3.5mm Male Audio Plug
- Color: Black
- Material: plastic;metal
- Size: 5 x 0.9 cm / 2″ x 0.4″ (L*Max.D)
₨ 60 -
Jumper Wires Dupont Line 40 pins Male to Female 30cm for Breadboard Arduino
- A 40 position, multicolor male to Female ribbon cable
- The cables can be separated to form an assembly containing the number of wires you require for your connection
- 40pcs 30cm 2.54mm male to Female Breadboard jumper wire cable for Arduino
- A 40 position, multicolor male to Female ribbon cable
- The cables can be separated to form an assembly containing the number of wires you require for your connection
- 40pcs 30cm 2.54mm male to Female Breadboard jumper wire cable for Arduino
₨ 195 -
LM2596S DC-DC Constant Current Module LM2596 DC-DC 7V-35V Step-down Adjustable CC/CV Power Supply Module
- 100% brand new and high quality
- Type: DC/DC Constant Current / Constant Voltage
- Size: (L*W*H)4.80*2.40*1.4cm/1.89″*0.94″*0.55″
- Input Voltage: 5V-57V input voltage must be higher 2V than the output voltage
- Output Current: rated current 2.5A/ 3A MAX ( Heat-sink Needed)
- Output Voltage: 1.25-30V (Adjustable)
- Output Power: 15w max at maximum voltage
- Output short circuit protection: Yes, constant current (constant current setting values)
- Input reverse polarity protection: Yes,
- Constant current range: 0.2-3A (adjustable, default transferred 1A)
- Turn lamp current: constant current value * (0.1), turn the lamp current constant current value Linkage
₨ 350 -
0.7mm Solder Wire with Flux 100g Roll 🔗 | 63/37 Fine Core | Smooth & Reliable Soldering
🔗 Fine 0.7mm Wire – Precise soldering in tight spaces
⚡ 63/37 Alloy – High-quality tin-lead combination
🧪 2% Flux Core – Smooth and easy solder flow
🌡️ Low Melting Point (183°C) – Quick and efficient soldering
💎 Non-Corrosive & Odorless – Safe and clean
🛠️ Good Solderability – Reliable joints for electronics
📦 Compact 100g Roll – Convenient plastic spool
🎨 Silver Wire Color – Clear visibility during work
🔥 Even Melting & Less Smoke – Cleaner soldering experience
🔧 Versatile Use – Electronics, cables, toys, and DIY projects₨ 495 -
Mini N20 Gear Motor DC 3V-6V Slow Speed Full Metal Gearbox Gear Reducer Large Torque
- DC 5V 50RPM
- Rated voltage: DC 5V
- No-load current: 30mA
- No-load speed: 50RPM
- Suitable voltage: DC 3-6V
- Speed: 45RPM-50RPM
- Size: 24mm
- Shaft Size: 9.3mm
₨ 150 -
12V DC Mini Water Pump – High Pressure Sharp Nozzle Pump for Aquarium & Car Wiper Motor Washer Pump
-
⚡ 12V DC High-Pressure Pump – efficient water transfer
-
💧 Flow Rate: 80–120L/H for consistent performance
-
🛠️ Compact Design: 3cm diameter × 6.5cm length – easy to install
-
🔧 Sharp Nozzle Output: Focused water flow for precision use
-
🏗️ Durable ABS Plastic Construction – long-lasting and sturdy
-
🛸 Continuous Working Life: 500 hours for reliable operation
-
🔌 Wire Length: Approx. 23cm for flexible installation
-
🌡️ Wide Temperature Range: -25°C to 80°C for safe operation
-
🌀 Displacement: 450ml/10s for high efficiency
-
⚡ High Pressure Output: 190KPA after motor closure
-
🐠 Versatile Use: Suitable for aquariums, car wipers, washer pumps, and DIY projects
-
🌈 Color: Black for sleek professional look
₨ 298 -
-
1Pairs 3V-5V FF-180 DC Motors Plus 8cm Plastic Fan Propellers Set for DIY Projects
- Purpose: Suitable for Mini Fan, DIY toy accessories remote control car model
- Outer Diameter: Approx. 90mm
- Inner Hole: Approx. 2mm / 0.08in
- Material: ABS
₨ 80 -
SRC-555 DC Motor 12V-24V 30W High-Torque 7000 RPM Small Electric Motor for DIY Projects, Drills & Robotics
-
🚀 High-Velocity Output: Delivers a rapid 7000 RPM for fast-cutting and high-speed tasks.
-
🔋 Wide Voltage Range: Compatible with 12V, 18V, and 24V DC power sources for maximum flexibility.
-
💪 30W Power Rating: High-wattage performance ensures consistent torque under varying loads.
-
🛡️ Class B Insulation: Built to withstand higher internal temperatures, extending the motor’s lifespan.
-
📐 Precision Shaft: Features a 10mm x 3.2mm splined shaft for a non-slip grip on gears and pulleys.
-
⚙️ Compact Form Factor: Sized at 5.7cm x 3.6cm, fitting easily into tight enclosures and DIY housings.
-
💎 Durable Build: High-quality metal casing designed for industrial-grade durability and low vibration.
-
🛠️ Multi-Purpose Use: Perfect for CNC machines, RC vehicles, vacuum cleaners, and DIY drills.
₨ 390 -
-
716 Ultra-High-Speed 3V Mini Drone Motor | 35,000 RPM Coreless DC Motor | High-Performance 7mm x 16mm Powerhouse for Micro Quadcopters, Mini RC Planes & DIY Robotics
-
🔴 BLISTERING 35,000 RPM SPEED: Delivers immense rotational power designed specifically for high-thrust micro-drone flight and rapid aerial maneuvers.
-
🔵 CORELESS ROTOR TECHNOLOGY: Features a lightweight, ironless winding design that allows for lightning-fast acceleration and superior energy efficiency.
-
🟢 PRECISION MINIATURE DESIGN: Compact 7mm x 16mm body fits perfectly into standard micro drone frames like Tiny Whoops.
-
🟡 ULTRA-LIGHTWEIGHT PERFORMANCE: Weighing only ~2.9g, it minimizes total vehicle weight to maximize your flight time and agility.
-
🟣 LOW NOISE & VIBRATION: Engineered for smooth, quiet operation, providing stable flight and reduced mechanical wear over time.
-
🟠 HIGH TORQUE-TO-WEIGHT RATIO: Despite its small size, it generates significant torque to lift and push mini aircraft with ease.
-
⚪ DURABLE COMMUTATION: Utilizes high-quality precious metal brushes to ensure reliable electrical contact and a longer service life.
-
🔘 PLUG-AND-PLAY READY: Comes with flexible, pre-soldered leads for easy identification and a hassle-free installation process.
₨ 150 -