-
DC 12V 30AMP 6PIN T Shape RELAY
- Rating voltage: 12V
- Normal open current: 30mA
- Normal close current: 20mA
- Maximum switching: 300 operating/minute
- Compact 6-pin configuration
₨ 150 -
5PCS CR2032 Battery 3V Lithium Button Cell Coin Battery Long Lasting for Watch Remote
- Model: CR2032
- Material: Metal
- Rated capacity: 10
- Standard Voltage: 3V
- Storage Temperature: ＜45℃
- Working Temperature: -20~ +70℃
- Diameter: app.2cm/0.79in
₨ 150 -
12V DC 120 SMD LED Panel Light 75x75mm – Ultra Bright with Heat Sink
-
🔋 Voltage: 12V DC
-
💡 LED Type: 120 SMD 2835 Bright Chips
-
📐 Size: 75mm x 75mm Compact Square Panel
-
🛠️ Heat Sink Installed: Prevents overheating
-
⚡ Resistors Installed: Ensures consistent power flow
-
🧲 Durable Build: Long-lasting and energy-efficient
-
🔌 Ready to Use: Comes with positive & negative wires
-
🔧 Ideal For: Emergency lights, solar lights, DIY lighting, home lighting setups
₨ 150 -
-
Multi Output Bridge Rectifier PCB – 15V+15V, 5V, 12V DC Power Supply Board | 11cm x 6.5cm
-
✅ Supports regulated DC outputs: 15V+15V, 5V, and 12V.
-
🔋 Ideal for powering amplifier boards, microcontrollers, and lab projects.
-
🔄 Uses IN4007 diodes for full-wave bridge rectification.
-
⚙️ Includes mounting for 7812 and 7805 voltage regulators.
-
🔧 Designed to support TIP41C and TIP42C power transistors.
-
🔍 Clearly marked silkscreen for easy identification of components.
-
🧲 Equipped with positions for filter capacitors (up to 2200µF / 35V).
-
⚡ Compatible with center-tapped transformer AC input.
-
🧰 Strong PCB layout for high current and heat dissipation.
-
📏 Compact size: 11cm x 6.5cm, great for small enclosures.
₨ 150 -
-
Single Channel 5V Relay Module – Optocoupler Protection | Compatible with Arduino, ESP32, Raspberry Pi
-
✅ Wide Compatibility – Works with 5V and 3.3V logic (Arduino, ESP32, STM32, etc.)
-
✅ Dual Trigger Support – Supports both High-Level and Low-Level trigger signals
-
✅ High Power Switching – Handles up to 250V AC or 30V DC loads at 10A
-
✅ Optocoupler Isolation – Prevents voltage spikes from damaging the control board
-
✅ Built-in Indicator LEDs – Shows relay and power status at a glance
-
✅ Secure Connections – KF301 screw terminals for firm and easy wiring
-
✅ Durable Songle Relay – Industrial-grade relay for long-lasting performance
₨ 150 -
-
LM2596 DC-DC Buck Converter Step-Down Module
-
🔌 Input Voltage: 4V to 40V DC
-
⚡ Output Voltage: 1.25V to 37V DC (adjustable)
-
💡 Output Current: Up to 2A continuous, 3A peak
-
📈 Efficiency: Up to 92%
-
🎛️ Voltage Adjustment: via onboard potentiometer
-
🔁 Conversion Type: Buck (Step-Down)
-
🌡️ Protection: Built-in thermal and short circuit protection
-
🧲 Equipped with a 470µH inductor and large capacitors for stable output
-
📏 Compact Size: Easy to integrate into small enclosures and projects
₨ 150 -
-
5V 2A Dual USB Power Bank Module
-
🔌 Dual USB Outputs: Provides 5V 2A total (ideal for charging two devices simultaneously)
-
⚡ Boost Converter: Converts 3.7V battery to stable 5V USB output
-
🔋 Battery Protection: Built-in protection from overcharge, over-discharge, and short circuit
-
🔍 Micro USB Charging Input: Easily charge the battery using standard USB cable
-
📦 DIY Friendly: Perfect for making custom power banks, portable chargers, and USB power supplies
-
💡 LED Indicators: Status lights for charging and power
₨ 150 -
-
5V 2A Triple USB Power Bank Module | 3-Port Boost Converter for DIY Power Bank
-
🔌 Triple USB Output Ports: Charge up to 3 devices at once with 5V 2A total output
-
⚡ Boost Converter: Converts 3.7V battery to 5V stable USB power
-
🔦 Built-in LED Torch: Small but powerful light for emergencies
-
🔋 Battery Protection Circuit: Prevents overcharging, over-discharging, and short circuits
-
📦 Easy to Use: Just connect a 3.7V Li-ion battery (like 18650) and you’re ready to go
-
🎯 Ideal for DIY Projects: Make your own custom power banks, USB hubs, or emergency chargers
₨ 150 -
-
12V DC Brushless Mini Cooling Fan | 2500 RPM Silent Cooler | Compact 4x4x2 cm Fan for Electronics, DIY Projects, 3D Printers & Power Supplies
-
🔋 Voltage: 12V DC
-
⚙️ Type: Brushless Mini Cooling Fan
-
📏 Size: 4 x 4 x 2 cm (compact design)
-
🔄 Speed: 2500 RPM
-
🔇 Low Noise Operation
-
🔧 Easy Installation with 2-Wire Connector
-
💻 Ideal for Electronics, DIY Projects, 3D Printers, Power Supplies, and Cooling Modules
₨ 150 -
-
716 Ultra-High-Speed Micro Drone Motor | 3V-3.7V 35,000 RPM Coreless DC Motor | High-Torque 7mm x 16mm Powerhouse for RC Quadcopters, Mini Planes & DIY Robotics
-
🔴 BLISTERING 35,000 RPM SPEED: Delivers massive rotational power for high-thrust performance, ensuring your drone can take off, climb, and accelerate with ease.
-
🔵 IRONLESS CORELESS DESIGN: By eliminating the heavy iron core, this motor achieves a superior power-to-weight ratio and lightning-fast acceleration.
-
🟢 ZERO MAGNETIC COGGING: The coreless technology ensures ultra-smooth rotation and consistent power delivery without the “jerky” feel of traditional motors.
-
🟡 MINIMAL ROTATIONAL INERTIA: Allows the flight controller to make instant adjustments, providing the snappy, precise control needed for FPV racing.
-
🟣 ULTRA-LIGHTWEIGHT (2.9g): Optimized to shed every unnecessary milligram, maximizing your drone’s flight time and overall agility.
-
🟠 1S LIPO OPTIMIZED: Specially engineered to run at peak efficiency on 3.7V power systems, the standard for micro and nano-sized aircraft.
-
⚪ DURABLE BRUSH COMMUTATION: Built with high-quality precious metal brushes for reliable electrical contact and a longer lifespan during high-speed operation.
-
🔘 PLUG-AND-PLAY VERSATILITY: Comes with pre-soldered, color-coded lead wires for a quick, hassle-free installation into Tiny Whoops and DIY hobby projects.
₨ 150 -
-
716 Ultra-High-Speed 3V Mini Drone Motor | 35,000 RPM Coreless DC Motor | High-Performance 7mm x 16mm Powerhouse for Micro Quadcopters, Mini RC Planes & DIY Robotics
-
🔴 BLISTERING 35,000 RPM SPEED: Delivers immense rotational power designed specifically for high-thrust micro-drone flight and rapid aerial maneuvers.
-
🔵 CORELESS ROTOR TECHNOLOGY: Features a lightweight, ironless winding design that allows for lightning-fast acceleration and superior energy efficiency.
-
🟢 PRECISION MINIATURE DESIGN: Compact 7mm x 16mm body fits perfectly into standard micro drone frames like Tiny Whoops.
-
🟡 ULTRA-LIGHTWEIGHT PERFORMANCE: Weighing only ~2.9g, it minimizes total vehicle weight to maximize your flight time and agility.
-
🟣 LOW NOISE & VIBRATION: Engineered for smooth, quiet operation, providing stable flight and reduced mechanical wear over time.
-
🟠 HIGH TORQUE-TO-WEIGHT RATIO: Despite its small size, it generates significant torque to lift and push mini aircraft with ease.
-
⚪ DURABLE COMMUTATION: Utilizes high-quality precious metal brushes to ensure reliable electrical contact and a longer service life.
-
🔘 PLUG-AND-PLAY READY: Comes with flexible, pre-soldered leads for easy identification and a hassle-free installation process.
₨ 150 -
-
ULTRA-POWER 300W MOSFET MONO AMPLIFIER PCB
-
💎 Dual N-Channel Output: Utilizes two IRF240 MOSFETs for superior current handling and a rich, musical audio signature.
-
⚡ High Power Delivery: Capable of pushing a massive 300 Watts RMS in mono configuration for high-impact sound.
-
🔋 Wide Voltage Range: Optimized for Dual $56V$ DC operation, allowing for maximum dynamic range and headroom.
-
🛠️ User-Friendly Silk Screen: Features ultra-clear component labeling, making it easy for hobbyists to populate and solder with zero errors.
-
🌡️ Advanced Thermal Logic: Designed with dedicated mounting spaces for BD139 and MJE series driver transistors to manage heat effectively.
-
🔊 Subwoofer Ready: The high current output makes it an ideal choice for driving large-diameter subwoofers with tight control.
-
📐 Space-Saving Footprint: The pro-engineered $10\text{cm} \times 9\text{cm}$ PCB fits easily into standard amplifier chassis and heat sinks.
-
🛡️ Premium Build Quality: Manufactured on a high-grade glass epoxy substrate for long-lasting durability and heat resistance.
-
🔌 Flexible Inputs: Includes dedicated pads for Audio Input, Ground, and Speaker Output for clean and easy wiring.
-
🏗️ Heavy-Duty Support: Supports large-wattage ceramic resistors and high-voltage electrolytic capacitors ($80V$) for stable performance.
₨ 150 -