-
12V DC 18W LED Round Chip Board | Ultra Bright 2160LM | Energy Saving Light
✨ Ultra Bright Output (2160LM) – Lights up any space instantly
⚡ Low Power Consumption – Only 12V DC, energy efficient
🌈 Natural Light (Ra ≥ 80) – Comfortable for eyes, true color visibility
🛠 Durable Aluminum Body – Better cooling, longer life
🔥 Heat Control Design – Requires heat sink for safe operation
⏳ Long Life (50,000 Hours) – No frequent replacements
🔧 DIY Friendly – Easy to install in custom lighting projects₨ 55 -
12V DC 10AMP 5 PIN SPDT RELAY
- Material: Plastic and Metal
- Color: Black
- Parameters: 12V 10A
- Size: 1.9cmx1.5cmx1.5 cm
- Quantity: 1 Pcs
- Coil Current 30mA
₨ 55 -
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
DIY Bass Treble Tone Control PCB Board – High-Quality Audio Preamp Circuit
-
Complete Tone Control: Includes dedicated mounting points for Bass, Treble, and Balance potentiometers to customize your sound output.
-
Clearly Labeled Silkscreen: All component values (e.g., 1K, 10K, 10uF) and polarities are printed directly on the board for error-free assembly.
-
Standard Component Support: Designed to use common, easy-to-find components like C945 transistors and standard resistors.
-
Dual Input/Output Design: Features designated Input and Output solder pads for easy integration between your audio source and amplifier.
-
Compact JML 09 Design: A space-saving layout that fits easily into custom amplifier chassis or project boxes.
-
Wide Supply Range: Includes a dedicated Supply section (+/-) for powering the preamp circuit.
₨ 50 -
-
3-Pin 125V 6A Toggle Switch | ON–ON 2-Position | Mini Metal Lever Switch
-
✅ Switch Type: ON–ON (2 Position)
-
✅ Rated Voltage & Current: 125V AC, 6A
-
✅ Pin Configuration: 3 Pins (SPDT)
-
✅ Compact Size: 13 x 8 x 10 mm
-
✅ Metal Lever Handle – Durable and responsive
-
✅ Panel Mount Design – Includes nuts and washers
-
✅ Ideal for switching between two outputs or circuits
-
✅ Perfect for DIY electronics, robotics, and control systems
₨ 50 -
-
10PCS 2W 82 Ohm High Power Resistors
✅ Resistance: 82 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 68 Ohm High Power Resistors
✅ Resistance: 68 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 15 Ohm High Power Resistors
✅ Resistance: 15 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 1K Ohm High Power Resistors
✅ Resistance: 1K Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 3.9 Ohm High Power Resistors
✅ Resistance: 3.9 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 560 Ohm High Power Resistors
✅ Resistance: 560 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50 -
10PCS 2W 8.2 Ohm High Power Resistors
✅ Resistance: 8.2 Ohm
✅ Power Rating: 2 Watt
✅ High-quality carbon film construction
✅ Excellent heat resistance and durability
✅ Clear color bands for easy identification
✅ Perfect for DIY, repair, and industrial use
✅ Reliable and stable performance even under high loads₨ 50