-
6V-12V RS-550 DC Motor High Torque Electric Brushed Motor
- Model: RS-550
- Rated voltage: 6V-15V
- No-load speed: 7000 / min
- Motor diameter: 35mm
- Motor length: 55mm (without shaft)
- Motor shaft diameter: 3mm
- Motor shaft length: 9mm
- The motor weighs: 220g
₨ 415 -
MECHANIC SU7 UV Solder Mask Ink | Bright Green | Instant Cure | Shehzad Electronics
- 🌈 Bright Green Color – Clear visibility on PCB repairs.
- ⚡ Instant UV Cure – Hardens in 10–30 seconds.
- 🔥 High Heat Resistance – Withstands up to 280°C.
- 🛡️ Strong Insulation – Prevents short circuits.
- 🧪 Epoxy Resin Formula – Durable and reliable material.
- 🛠️ Easy Application – Simple for hobbyists and pros.
- 📱 Universal PCB Use – Works on phones, computers, circuits.
- 🧩 Scratch Protection – Shields damaged PCB tracks.
- 🌍 Corrosion Resistant – Long-lasting protection.
- 🏷️ Shehzad Electronics Quality – Trusted supplier for repair tools.
₨ 298 -
18W SKD White LED Round MCPCB Chip Plate (58mm) – Premium 2835 SMD Replacement Board for LED Bulbs
-
💡 High-Lumen Crisp White Output: Packed with 22 high-efficiency 2835 SMD LED beads that deliver uniform, intense white light coverage with no dark rings or shadows.
-
❄️ Premium Aluminum Thermal Base: Thick MCPCB substrate guarantees fast heat dissipation away from the LED chips, preventing premature burnout and maintaining stable performance.
-
🎯 Perfect 18W Standard Size: With its standard 58mm outer diameter and center cutout, it fits seamlessly into standard 18W bulb housings, T-bulbs, and ceiling downlights.
-
⚡ Convenient Solder Terminals: Features wide, clearly marked positive ($+$) and negative ($-$) pads for fast, secure wiring to your external 18W LED driver circuit.
-
🛠️ Industrial SKD Grade Quality: Designed as durable raw material for manufacturers, commercial lighting repair shops, and DIY technicians looking for bulk reliability.
₨ 48 -
-
105J 400V CBB22 Metallized Polypropylene Film Capacitors (1uF) – 10 Pcs
-
🔴 High-Grade 1uF Capacity: Features accurate 105J (±5% tolerance) rating for highly stable, reliable performance in demanding circuits.
-
🔵 Heavy-Duty 400V Protection: Built to safely manage high-voltage spikes, making it excellent for heavy AC/DC filtering setup.
-
🟢 Premium Self-Healing Film: Advanced metallized polypropylene technology self-repairs minor dielectric breakdowns to prevent permanent short circuits.
-
🟡 Minimal Signal Distortion: Delivers crystal-clear audio coupling and highly efficient mains frequency filtering with zero heat buildup.
-
🟣 Sturdy Through-Hole Leads: Equipped with high-conductivity radial pins designed for swift, stable, and hassle-free soldering onto PCBs.
₨ 160 -
-
TN830L Digital Multimeter – LCD Display Voltmeter Ammeter Ohmmeter (1999 Count, Backlight, Overload Protection)
- 📟 LCD Display with Backlight – Clear and easy readings
- ⚡ 1999 Count Display – High measurement accuracy
- 🔌 Multi-Function – Measures Voltage, Current, and Resistance
- 🛡️ Overload Protection – Safe operation
- 📌 Data Hold Function – Freeze readings instantly
- 🔋 Low Battery Indicator – Never run out unexpectedly
- 💪 Shockproof Silicone Cover – Durable and sturdy design
- 🎯 High Precision & Stability – Reliable performance
- 🧰 Portable & Lightweight – Easy to carry anywhere
- 🏠 Wide Application – Suitable for home, lab, and industrial use
₨ 995 -
XL6009 DC-DC Buck Boost Converter | Step Up Step Down Voltage Regulator | 3.8V–32V to 1.25V–35V | High Efficiency 94%
🔵 🔄 2-in-1 Buck & Boost Converter
Easily step voltage up or down with a single compact module.🟢 ⚡ Wide Input Voltage (3.8V – 32V)
Compatible with batteries, solar panels, adapters & more.🟡 🎯 Adjustable Output (1.25V – 35V)
Precisely control output voltage using onboard potentiometer.🔴 🔥 High Efficiency Up to 94%
Less power loss, more performance, and reduced heat.🟣 ⚙ High Switching Frequency (400KHz)
Better efficiency and smaller size compared to older modules.🟠 📉 Low Output Ripple (~50mV)
Smooth and stable voltage for sensitive electronics.🔵 💪 Strong Output Current Support
Handles up to 2A continuous load safely.🟢 🔋 Perfect for Battery Applications
Works great with lithium batteries, 18650 cells, and power banks.🟡 🚗 Ideal for Automotive Use
Stabilizes voltage for car electronics and 12V systems.🔴 ☀ Solar Compatible Design
Handles fluctuating solar input and keeps output stable.🟣 📦 Compact & Lightweight
Small size makes it easy to fit in any project.🟠 🛠 Easy to Use & Install
Simple IN/OUT terminals and adjustable screw control.🔵 🔒 Stable Voltage Regulation (±0.5%)
Reliable output for consistent performance.🟢 🌡 Wide Temperature Range (-40°C to +85°C)
Works in extreme conditions without issues.₨ 350 -
HOPE’S H-299 RECHARGEABLE LED TORCH | HIGH-POWER 2-GEAR PORTABLE SEARCHLIGHT | EMERGENCY HANDHELD FLASHLIGHT
-
🌈 DUAL-MODE VERSATILITY: Switch between Strong Light for maximum distance and Weak Light for extended battery life.
-
🔋 LONG-LIFE RECHARGEABLE BATTERY: Equipped with a premium 4V 350mAh sealed lead-acid battery for consistent power.
-
🔌 CORDLESS PLUG-IN DESIGN: Features a clever built-in two-pin AC plug—no more lost charging cables!
-
💡 HIGH-INTENSITY LED BEAM: Utilizes a 0.5W power-saving LED that provides a brilliant, concentrated white light.
-
⏱️ EXTENDED RUNTIME: Enjoy up to 4 hours of continuous illumination on a single full charge.
-
🔴 SMART CHARGE INDICATOR: A dedicated built-in LED light glows red to confirm the device is safely charging.
-
🛠️ RUGGED ERGONOMIC GRIP: The textured, non-slip body ensures a firm hold even in wet or emergency conditions.
-
🚀 ULTRA-PORTABLE DIMENSIONS: At only 12.5cm long, it’s the perfect size for pockets, backpacks, or glove compartments.
₨ 220 -
-
🚀 TL071 IC | High-Speed JFET-Input Operational Amplifier
-
⚡ High Slew Rate: Boasts a rapid $13 \text{ V/µs}$ rate, ensuring excellent pulse response and high-speed signal tracking.
-
💎 Ultra-Low Harmonic Distortion: Maintains a typical $0.003\%$ distortion level, making it perfect for premium audio equipment.
-
🔌 Low Input Bias Current: Features JFET inputs that minimize current leakage (typically $30 \text{ pA}$), preserving sensitive signals.
-
🛡️ Short-Circuit Protection: Built-in output protection prevents chip failure during accidental grounding or overloads.
-
📉 Wide Common-Mode Range: Operates reliably across a broad range of input voltages without experiencing latch-up.
-
🌡️ Internal Frequency Compensation: Designed for stable operation across various frequencies without the need for external components.
-
🔋 Flexible Power Supply: Optimized to work efficiently with a wide range of dual-supply voltages from $\pm 5\text{V}$ up to $\pm 15\text{V}$.
-
📦 Compact PDIP-8 Package: The standard 8-pin through-hole design ensures easy breadboarding and secure PCB mounting for DIYers and pros.
₨ 40 -
-
4V 15W High-Power Ultra Bright COB LED Strip Light | 14cm x 3.6cm Large Surface COB Panel
-
🚀 Unmatched 15W Power: Provides a massive brightness boost compared to standard modules, making it a true heavyweight in luminosity.
-
🔋 4V DC Optimization: Specially designed to run on 4V power sources, making it the perfect match for high-capacity 18650 battery builds.
-
📐 Extra-Large Surface Area: A massive 14 x 3.6 cm lighting footprint ensures maximum light distribution across large areas.
-
💡 Advanced COB Technology: Offers a “Super Bright” and uniform glow that mimics professional stadium-style lighting on a smaller scale.
-
🌡️ Integrated Cooling Frame: The aluminum-backed design ensures efficient heat dissipation, prolonging the life of every LED chip.
-
⚙️ Unique Design Profile: Features a precision central cutout and slim height, allowing for unique creative mounting in circular or tubular housings.
-
🛠️ Clear Polarity Indicators: Comes with clearly marked (+) and (-) solder points at both ends for flexible and easy wiring.
-
🏗️ Industrial Build Quality: Specifically labeled as the KS36139-58 model, ensuring a standardized, reliable fit for professional repairs and upgrades.
₨ 130 -
-
🔋 High-Performance 390mah 3.7V Lithium-Ion Battery
-
⚡ Optimized Capacity: Offers a concentrated 390mAh of power for small-scale devices.
-
📏 Sleek & Narrow Design: Unique 3.3 x 1.6 cm footprint is perfect for long, thin enclosures.
-
🛡️ Advanced Safety Board: Features an integrated protection circuit to prevent over-discharge and short circuits.
-
🪶 Ultra-Lightweight: Weighs only 7.7g, making it ideal for weight-sensitive applications like mini drones.
-
🔌 Pre-Wired Connection: Comes with durable red and black leads for easy soldering and secure polarity identification.
-
🔄 Steady Voltage Supply: Maintains a reliable 3.7V output for consistent performance of sensitive components.
-
📐 Low-Profile Thickness: Only 0.8 cm thick, allowing for incredibly slim product designs.
-
🌍 Efficient Rechargeability: Designed for a long life cycle with modern Li-ion chemistry for maximum sustainability.
₨ 150 -
-
PRO-SERIES 200W D1047 STEREO AMPLIFIER PCB
-
🔊 Dual-Channel Stereo: Complete Left and Right channel amplification on a single, high-quality board.
-
💎 Quad D1047 Power: Utilizes four D1047 NPN transistors for a balanced and punchy output.
-
⚡ 200W Total Power: Delivers 100W per channel, perfect for 8-inch to 10-inch home speakers.
-
📏 Extended PCB Design: Large 14.6cm x 8cm layout provides better airflow and easier soldering.
-
🛠️ Error-Proof Assembly: All component values are printed directly on the board for a “no-manual” assembly experience.
-
🌡️ Integrated Heat Management: Linear transistor alignment allows for direct mounting to a single aluminum heat sink.
-
🔋 Efficient Voltage Range: Optimized for 25V-0-25V AC input, making it compatible with standard 5A-7A transformers.
-
🛡️ Built-in Power Section: Features dedicated slots for large filter capacitors ($4700\mu F$ or higher) for hum-free audio.
-
🔌 Versatile Connectivity: Separate pads for Ground (GND), Speaker Out (SP), and Audio Input (IN) for clean wiring.
₨ 110 -
-
TDA7379 IC – High-Power 4-Channel / 2-Channel Audio Amplifier Chip
-
High Output Power:
4×10W (4-channel mode) or 2×30W (bridge mode) -
Class-AB Audio Amplifier:
Low distortion and clean sound quality -
Wide Operating Voltage:
8V to 18V DC (12V recommended) -
Built-In Protection:
Thermal shutdown, short-circuit protection, and overload protection -
Versatile Application:
Suitable for car amplifiers, home audio systems, multimedia speakers, and DIY projects -
High Stability & Reliability:
Performs smoothly at high volumes with proper heat dissipation -
Compact 15-Pin Multiwatt Package:
Easy to install and ideal for custom amplifier designs
₨ 514 -