-
6V-18V DC Motor RS-395 High Torque Motor 6000 Rpm Dual Brush Motor 83 Ratings34 Answered Questions
- Voltage: DC 12V
- Speed: 6000RPM
- No-load current: <90mA
- Motor outer diameter: 29.7MM
- Applicable voltage: DC 6V-18V
- Body height: 46.45MM
- Shaft diameter: 2.3MM
- Output shaft length: 9.8MM (rear output shaft: 5.8)
- Screw hole: M2.5
- Installation hole distance: 16.5MM
- Weight: 110g
₨ 220 -
AC to DC 12V 1A Power Supply Adapter – Dual Pin Charger with Protection
-
🔴 Regulated 12V DC Output – Provides stable and consistent voltage.
🟢 High Reliability SMPS Adapter – Low ripple, low interference for sensitive devices.
🔵 Dual Pin EU Plug – Ready to use with European sockets, no converter needed.
🟡 Protection Features – Short circuit, over-voltage, and over-current protection.
🟣 Compact & Lightweight – Easy to carry and install.
🟠 Energy Efficient – High efficiency with low power consumption.
🔷 Single Output Voltage – Suitable for a wide range of 12V electronics.
⚙ Stabilized Output – Safe for sensitive electronics like LED lights, routers, and CCTV cameras.
₨ 220 -
-
8 meters Heat Shrink Tube 1mm 2mm 3mm 4mm 5mm 6mm 7mm 8mm Heat Shrink Tubing Shrinkable Wrap Sleeve Kit
- Size: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm
- Total length: 8 Meter, 0ne meter of each size
- Color: Black
- Material: Polyolefin
- Minimum Shrinkage Temp:+75°C
- Full Shrinkage Temp:+110°C maximum
- Operating Temperature:-55°C to +125°C
- Tensile strength:10.4 Mpa
- Dielectric strength:15 kV/mm
- Flammability :Flame Retardant
₨ 220 -
IR Remote Control ON/OFF Switch | SK193 | CD4017 Chip | 12V DC | SE Shehzad Electronics
- 📡 IR Remote Control – Operates with any TV or MP3 remote.
- ⚡ CD4017 Chipset – Stable and reliable circuit operation.
- 🔋 12V DC Supply – Easy to power with standard adapters.
- 🎯 Dual Switch Modes – Switch 1 ON → Switch 2 OFF, and vice versa.
- 💡 LED Indicators – Clear status for each switch.
- 🏠 Home Appliance Control – Fans, bulbs, TVs, washing machines.
- 🔌 Wide Load Range – Handles 5V–250V up to 10A.
- 📦 Compact Design – Small size, easy installation.
- 🌍 Operating Range >5m – Reliable remote response.
- 🏷️ Shehzad Electronics Quality – Trusted brand for automation kits.
₨ 220 -
3.7V 1000mAh Lithium-Ion Rechargeable Battery – Reliable & Long-Lasting Power
✔ Voltage: 3.7V – Ensures stable and continuous power supply
✔ Capacity: 1000mAh – Extended battery life for uninterrupted operation
✔ Size: 4.9×4.2×0.47 cm, compact and portable
✔ Lightweight: 19.6g, ideal for integration into small devices
✔ Rechargeable: Supports multiple charge cycles for long-term use
✔ Safe & Reliable: Built-in protection against overcharge, discharge, and short-circuit
✔ High Energy Density: Optimized for efficient and powerful performance
✔ Easy Installation: Red and black lead wires for quick and secure connections₨ 220 -
18650 Li-ion Rechargeable Battery 1500mAh | High Capacity | 45g
-
🔋 1500mAh High Capacity – Extended usage time for your devices.
-
🔁 Rechargeable Li-ion Technology – Long life cycle and eco-friendly performance.
-
⚡ Stable and Reliable Output – Consistent energy for peak device performance.
-
🛡️ Advanced Safety Protection – Built-in safeguards against overcharging and overheating.
-
🏋️ Lightweight Design (45g) – Easy to carry, perfect for portable applications.
-
🔦 Wide Range Compatibility – Suitable for flashlights, toys, radios, DIY kits, and more.
₨ 220 -
-
300W Stereo Amplifier PCB with Built-in Power Supply
-
300W indoor amplifier PCB for high-power audio applications.
-
4 NPN & PNP output transistors ensure efficient signal amplification.
-
Rectifier included – ready to use with your dual AC supply.
-
Compatible with 25+25V AC dual supply for versatile power options.
-
Ideal for DIY enthusiasts and audio professionals seeking reliable performance.
₨ 220 -
-
Mini Submersible Water Pump | 3V–5V DC | Silent Micro Motor for Arduino, DIY, Fountain, Aquarium
-
✅ Operating Voltage: 3V–5V DC
-
✅ Low Noise: Silent operation – ideal for home or desk projects
-
✅ Compact Size: 42.6mm x 22.7mm x 23.9mm
-
✅ Water Outlet Diameter: 7.45mm
-
✅ Material: High-quality plastic body
-
✅ Waterproof Design: Fully submersible
-
✅ Wire Type: 2-wire DC (easy to connect)
-
✅ Current Draw: ~100mA @ 3V, ~180mA @ 5V (approx.)
-
✅ Applications: Mini fountains, cooling systems, fish tanks, hydroponics, DIY Arduino or Raspberry Pi projects
₨ 220 -
-
12V–16V DC Mini Air Pump | Compact & Quiet | Ideal for Aquarium, DIY & Inflatables
-
✅ Wide Voltage Range: Operates smoothly on 12V to 16V DC power
-
✅ Compact Design: Only 6.1 cm long – ideal for tight spaces and portable projects
-
✅ Clear Port Orientation: Inlet on the side, outlet in the center – easy tube connections
-
✅ Quiet Operation: Designed for low-noise performance
-
✅ Multi-Purpose: Great for aquariums, DIY projects, small inflatables, and mini pneumatics
-
✅ Reliable Build: Durable construction for consistent airflow delivery
-
✅ Lightweight: Easy to install or embed in custom setups
₨ 220 -
-
ZX-395 Brushed DC Motor – 3V to 9V – High Torque Motor 6000RPM – DIY & Robotics
🔹 Model: ZX-395
🔹 Motor Type: Brushed DC
🔹 Voltage Range: 3V – 9V
🔹 Rated Speed (RPM): 6000
🔹 Shaft Size: 13.4mm (Length) × 2.2mm (Diameter)
🔹 Motor Dimensions: 4.6cm (Length) × 2.7cm (Diameter)
🔹 Durable build for long-term use
🔹 Stable performance under variable voltages
🔹 Ideal for: DIY Projects, Robotics, Toys, and Electronic Prototyping
🔹 Available at Shehzad Electronics₨ 220 -
12V Bluetooth Audio Receiver Module – Wireless Music Receiver for Amplifiers & DIY Audio Projects
-
🔹 Operating Voltage: 12V DC
-
🔹 Wireless Audio Streaming via Bluetooth connection
-
🔹 High-Quality Stereo Output for clear and crisp sound
-
🔹 Compact Design – easy to integrate into custom projects
-
🔹 Stable Connection with strong Bluetooth signal range
-
🔹 Low Power Consumption for efficient performance
-
🔹 Plug & Play Operation – simple setup, no programming needed
-
🔹 Compatible with Phones, Laptops & Tablets
-
🔹 Ideal for Amplifiers, Car Audio & Home Audio Systems
-
🔹 Durable PCB Build ensuring long life and reliability
₨ 220 -
-
Dual USB Power Bank Module 5V 2.1A – DIY Battery Charger Board with LED Display
-
Dual USB Output: Charge two devices simultaneously with dedicated $1\text{A}$ and $2.1\text{A}$ ports for standard and fast-speed charging.
-
Smart LED Digital Display: Real-time battery percentage monitoring (0–100%) so you’re never caught with a dead battery.
-
Dual Input Options: Supports both USB Type-C and Micro-USB charging cables for maximum compatibility.
-
Compact & Durable: Slim PCB design ($T=1.0\text{mm}$) makes it easy to fit into 3D-printed cases or small enclosures.
-
Advanced Safety Protection: Built-in overcharge, over-discharge, and short-circuit protection to keep your batteries and devices safe.
-
Easy DIY Setup: Clearly marked B+ and B- soldering points for quick connection to 3.7V lithium battery cells.
₨ 220 -