-
Premium 560mAh 3.7V Lithium-Ion Polymer Battery
* 🚀 High Energy Density: Delivers a potent 2.07Wh of energy in a remarkably small form factor.
-
📏 Ultra-Thin Profile: Only 5mm thick, ideal for sleek, low-profile device enclosures.
-
🛡️ Integrated PCM: Built-in protection circuit prevents over-charging, over-discharging, and short circuits.
-
🪶 Feather-Light: Weighing just 10.6g, it’s perfect for drones and weight-sensitive RC models.
-
⚡ Stable Voltage: Maintains a consistent 3.7V output for smooth and reliable component performance.
-
🔄 Long Cycle Life: Designed to endure hundreds of charge/discharge cycles with minimal capacity loss.
-
🧵 Pre-Wired Leads: Comes with flexible positive/negative wires for quick and easy installation.
-
🌍 Eco-Friendly Efficiency: Modern Lithium-ion chemistry provides a cleaner, more efficient alternative to Ni-Cd batteries.
₨ 150 -
-
Premium 600mah 3.7V Lithium-Ion Polymer Rechargeable Battery
-
⚡ High Energy Density: Packs significant power, such as 6.66Wh or 2.22Wh, into a miniature footprint.
-
🛡️ Integrated Protection: Features a built-in Protection Circuit Module (PCM) to prevent overcharging and short circuits.
-
📏 Ultra-Slim Profile: Available in thicknesses as thin as 0.48 cm to 1 cm, fitting into the tightest enclosures.
-
🔌 Plug-and-Play Ready: Select models come equipped with standard white JST connectors for effortless installation.
-
🔄 Long Cycle Life: Engineered to endure hundreds of recharge cycles with minimal capacity degradation.
-
🪶 Feather-Light Design: Extremely portable weights ranging from only 10.6g to 34g.
-
🎯 Stable Voltage Output: Maintains a consistent 3.7V nominal output for the smooth operation of sensitive components.
-
🛠️ Universal Compatibility: Ideal for GPS trackers, smartwatches, RC toys, and custom Arduino/Raspberry Pi projects.
₨ 160 -
-
Premium 75W Wood Handle Soldering Iron Heating Element
-
🚀 1. Ultra-Fast Thermal Response: Precision-wound nichrome wire allows the element to reach working temperature in record time.
-
🛡️ 2. Triple-Layer Mica Insulation: Encased in premium heat-resistant mica to ensure 100% electrical safety and prevent short circuits.
-
🪵 3. Seamless Wood-Handle Fit: Specifically calibrated with a 1.4cm outer diameter to fit standard external-heating wooden handle irons.
-
🌡️ 4. Consistent Heat Stability: Maintains steady, unwavering tip temperatures even during continuous, long-duration soldering sessions.
-
🔥 5. High-Temp Lead Wires: Equipped with reinforced, heat-resistant insulation cables that won’t crack or melt under extreme heat.
-
💎 6. Superior Oxidation Resistance: Treated core material resists corrosion and oxidation, significantly extending the lifespan of the heater.
-
⚡ 7. Efficient 220V Power Conversion: Optimized internal resistance ensures that all 75W of power is converted into usable heat at the tip.
-
🛠️ 8. Heavy-Duty Versatility: Robust enough for thick wire splicing while maintaining the precision needed for circuit board components.
₨ 130 -
-
Premium 9V 1.5A DC Power Supply Adapter – High-Efficiency AC to DC Converter
-
⚡ [Stable 9V Output] – Provides a constant 9V DC flow, ideal for sensitive electronic components.
-
🔌 [220V AC Input] – Standard wall plug design compatible with common household power outlets.
-
🔋 [High Current Capacity] – Delivers up to 1.5A (1500mA), powering devices that require more “juice” than standard 1A adapters.
-
⚪ [Sleek White Design] – A clean, modern aesthetic that looks great in any home or workspace setup.
-
🛠️ [Universal Barrel Jack] – Features a standard DC connector for plug-and-play compatibility with most electronics.
-
🛡️ [Built-in Protection] – Engineered with internal safety circuits to protect your gear from voltage spikes.
₨ 285 -
-
Premium RJ11 6P4C Modular TelePhone Connectors
-
🟠 GOLD-PLATED PINS – Maximum conductivity that prevents signal loss and fights off corrosion forever.
-
💎 DIAMOND-CLEAR CASING – High-grade transparent housing allows for flawless wire inspection during crimping.
-
⚡ 99.99% OXYGEN-FREE COPPER – Advanced internal pins ensure fast, lag-free data transmission and superior audio clarity.
-
🔗 UNIVERSAL 6P4C DESIGN – Fully compatible with all standard 4-wire telephone cables and RJ11/RJ12 wall jacks.
-
🏗️ INDUSTRIAL DURABILITY – Heavy-duty plastic latch designed to withstand thousands of plug-ins without snapping.
-
🛠️ DIY FRIENDLY – Precision-engineered slots make it incredibly easy to align wires, perfect for repairs or custom cable lengths.
₨ 8 -
-
Premium Single-Sided Copper Clad DIY Universal PCB Plate (10×8 Inch)
-
🔴 Premium Single-Sided Copper: Features a clean, uniform copper layer on one side, perfect for smooth etching and reliable soldering.
-
🟢 Generous Sizing: Measures 10 Inch x 8 Inch, providing plenty of surface area for large designs or multiple smaller projects cut from a single sheet.
-
🔵 DIY & Prototyping Ready: Excellent for toner transfer, photoresist, or CNC routing methods to create your own custom circuit boards.
-
🟠 Sturdy Base Material: Built on a durable, heat-resistant laminate backing (marked with “HS” branding as seen in 20260613_220037.jpg) to prevent warping during soldering.
-
🟡 Package Includes: 1x Single-Sided Copper Clad PCB Plate.
₨ 450 -
-
PRO-SERIES 200W D1047 STEREO AMPLIFIER PCB
-
🔊 Dual-Channel Stereo: Complete Left and Right channel amplification on a single, high-quality board.
-
💎 Quad D1047 Power: Utilizes four D1047 NPN transistors for a balanced and punchy output.
-
⚡ 200W Total Power: Delivers 100W per channel, perfect for 8-inch to 10-inch home speakers.
-
📏 Extended PCB Design: Large 14.6cm x 8cm layout provides better airflow and easier soldering.
-
🛠️ Error-Proof Assembly: All component values are printed directly on the board for a “no-manual” assembly experience.
-
🌡️ Integrated Heat Management: Linear transistor alignment allows for direct mounting to a single aluminum heat sink.
-
🔋 Efficient Voltage Range: Optimized for 25V-0-25V AC input, making it compatible with standard 5A-7A transformers.
-
🛡️ Built-in Power Section: Features dedicated slots for large filter capacitors ($4700\mu F$ or higher) for hum-free audio.
-
🔌 Versatile Connectivity: Separate pads for Ground (GND), Speaker Out (SP), and Audio Input (IN) for clean wiring.
₨ 110 -
-
Professional 165mm Aluminum Heat Sink – 12-Hole High-Capacity Radiator
-
🚀 Maximum Surface Area: Expertly designed with a 12-hole deep-fin structure to maximize contact with cooling air for rapid heat expulsion.
-
💎 Pure Aluminum Performance: Constructed from high-conductivity pure aluminum for significantly better thermal management than standard alloys.
-
⚡ Heavy-Duty Cooling: The large 165mm x 60mm footprint is specifically built to handle high-wattage COB LEDs and Power ICs.
-
🔊 Audio Stability: Keeps high-output Amplifier Transistors cool, preventing thermal distortion and ensuring consistent sound quality at high volumes.
-
📏 Precision Engineered: Features a durable and practical design that is easy to install, mount, and disassemble for project maintenance.
-
🛡️ Component Protection: Significantly extends the service life of your electronics by preventing “unnecessary waste” caused by overheating.
-
🌬️ Natural Convection Optimized: The longitudinal fin design promotes excellent airflow, making it effective for both passive and fan-forced cooling.
-
🛠️ Maker-Friendly Construction: A sturdy, thick base plate allows for easy drilling and tapping to fit any custom component layout.
-
✨ Professional Finish: A clean silver aesthetic that adds a professional look to your DIY enclosures and open-frame builds.
-
🌍 Wide Range of Uses: The ultimate cooling solution for Solar Inverters, High-Power LED Arrays, Industrial Power Supplies, and DIY Audio Amps.
₨ 590 -
-
Professional 60W Adjustable Temperature Transparent Soldering Iron – Fast Heating, Precision Control
-
🔄 Adjustable Temperature Control: Precise knob adjustment from 200°C to 450°C for versatile application on various projects.
-
📊 LCD Temperature Display: Clear digital readout shows your set temperature for accurate, repeatable results.
-
⚡ Rapid Ceramic Heating Element: Advanced external ceramic core heater ensures fast warm-up (to temp in ~1 min) and consistent, stable heat transfer.
-
💡 LED Heating Indicator: Visual light confirms when the iron is powered on and heating.
-
🛡️ Robust & Safe Construction: Features an anti-bending protective sleeve, a durable stainless steel sleeve, and six ventilation holes for optimal heat dissipation.
-
👐 Ergonomic Handle: High-temperature resistant transparent handle provides a secure, comfortable grip and enhanced safety during extended use.
-
🔌 Professional Safety Features: Equipped with an earth chip wire (grounding wire) for user protection. Lead-free soldering tip is included for safe, modern soldering.
-
⚖️ Complete Kit: Includes the soldering iron and a stand for safe unplugging, cooling, and storage.
-
📏 Specifications: 60W | Voltage: 200-240V | Temperature Range: 200-450°C.
₨ 1,160 -
-
PT2399 & JRC4558 IC-Based Echo Sound Board Kit – High-Quality Audio Effects
-
🎛️ Dual Premium ICs
-
PT2399: Digital echo/delay processor
-
JRC4558: Low-noise audio preamplifier
-
-
🔄 Adjustable Echo Effects
-
Control delay time, echo repeat, and feedback level
-
-
🎸 Multi-Device Compatibility
-
Works with guitars, microphones, karaoke systems, mixers, and more
-
-
🛠️ DIY-Friendly Design
-
Ideal for electronics hobbyists and audio professionals
-
-
🧱 Compact & Durable
-
Built with high-quality components for reliable performance
-
-
🔌 Easy Integration
-
Simple wiring and installation into any audio setup
-
₨ 630 -
-
PT2399 + Opamp 3-Volume Echo Sound PCB – Professional Grade Dual Supply Effects Board
✅ PT2399 + Opamp hybrid design
✅ Three dedicated volume controls
✅ Dual DC supply operation (±12V-±15V)
✅ Professional-grade audio quality
✅ Low-noise signal path
✅ Studio and stage ready
✅ Easy integration into existing gear
✅ Ideal for guitar/bass/vocal effects₨ 45 -
PT2399 Digital Echo/Delay IC – High-Quality Audio Processing Made Eas
-
Built-In A/D and D/A Converters: Ensures high-quality signal conversion for clear, natural sound.
-
Adjustable Delay Time: Can be set from 30ms to 340ms, suitable for various audio effects from short reverb-like echoes to long delays.
-
Low Noise and Distortion: Provides clean and clear audio output, ideal for professional audio systems.
-
Simple Implementation: Requires only a few external components, making it perfect for DIY projects and commercial designs.
-
Versatile Applications: Used in guitar pedals, karaoke systems, audio mixers, and more.
-
Compact Package: Available in a DIP-16 package, easy to use and solder on standard PCBs.
-
Low Cost & High Performance: Excellent performance at an affordable price.
₨ 60 -