- “16V 6800uF Electrolytic Polar Capacitor High-Quality” already exists in your wishlist
-
TPA3116D2 2.1 Channel Bluetooth 5.0 Subwoofer Amplifier Board | 200W HiFi Digital Audio Power Amp 2x50W+100W | X12A-Audio CA-3169B Upgraded Edition
-
🔊 Dual TPA3116 Chips: High-performance digital processing for powerful 50W+50W+100W output.
-
📶 Bluetooth 5.0 Technology: Wireless streaming up to 8 meters with stable, lag-free connectivity.
-
🎛️ 5-Knob Precision Control: Independent knobs for Master Volume, Treble, Bass Volume, Bass Frequency, and Left/Right Balance.
-
🎵 2.1 Channel Surround: Dedicated subwoofer output for deep, immersive low-end performance.
-
🔌 Dual Input Modes: Seamlessly switch between Bluetooth 5.0 and 3.5mm AUX wired input.
-
⚡ High-Efficiency Design: Power-saving circuitry with over 90% efficiency reduces heat and power loss.
-
🛠️ Wide Voltage Range: Flexible power options from DC 12V to 24V (works with laptops or car power).
-
🛡️ Built-in Protection: Engineered to minimize noise, current hum, and interference for clean audio.
-
🔘 Multi-Function Switch: One-touch knob controls playback (Play/Pause) and input mode switching.
-
📦 Ready-to-Use (Finished Board): Pre-assembled PCB; just connect your speakers and power supply to start.
₨ 4,500 -
-
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board – XH-M139 50W × 2 + 100W | DC 12V–24V | Hi-Fi Audio Amplifier Module
-
Model: XH-M139
-
Amplifier Chip: TPA3116D2 × 2
-
Channels: 3 (Left + Right + Bass)
-
Power Supply: DC 12V – 24V
-
Speaker Impedance: 4Ω – 8Ω
-
Signal-to-Noise Ratio: 100dB
-
Frequency Response: 14Hz – 100kHz
-
Switching Frequency: 1.2MHz
-
Material: Electronic Components
-
Board Size: 100 × 80 × 28 mm
-
Weight: 118g
₨ 2,800 -
-
Transparent Mica Sheet TO-3P TO-3Pll D1047 C5200 Insulation Pads heat sink sheet
- Package: TO-3P / TO-3Pll
- Size: 22 x 18 mm/ 20 x 25 mm
- Thickness: 0.12 mm
- Aperture: 3 mm
- Withstand voltage: 5 KV
- Condition: New
₨ 3 – ₨ 4 -
TSOP58238 IR Infrared Receiver High Sensitivity & Low Power
- Operating Voltage: 2.5V – 5.5V
- Carrier Frequency: 38kHz
- Response Time: Fast and accurate IR signal detection
- Ambient Light Resistance: Works well in bright environments
- Applications: Remote controls, automation systems, TVs, set-top boxes, Arduino, Raspberry Pi projects
₨ 15 -
TT Motor single Shaft DC 3V-6V Gear Motor for Smart Car Robot Arduino DIY
✅ Wide Voltage Range: Works efficiently on 3V–6V DC
💪 High Torque: ≥800 gf·cm at 3V for small loads
🚗 Smooth Speed: ~200 RPM at 4.5V, perfect for precise movement
🔌 Low Current Draw: ~170mA at 4.5V, energy-efficient
🌞 Battery & Solar Compatible: Flexible power source options
🤖 EMC Anti-Interference: Safe for microcontrollers and electronics
🛠 Durable & Compact: Fits into tight DIY project spaces
🎯 Versatile Applications: Arduino, smart cars, robots, toys, mini fans
💎 Perfect for Makers: Ideal for students, hobbyists, and tinkerers₨ 150 -
TTP223 Touch Button Module Capacitive Switch Sensor
- Size:11.5*8mm
- Power:2.5-5.5V
- Trigger setting mode:(1- Greater than Short;0- Greater than No Short)
- COLOR:RED
- Material: CCL
- AB=00:No-lock High TTL level ouput;
- AB=01:Self-lock High TTL level ouput;
- AB=10:No-lock Low TTL level ouput;
- AB=11:Self-lock Low TTL level ouput;
₨ 60 -
Type-C USB 2S-3S Lithium Battery Charging Boost Module 15W
🔋 Dual Battery Support — Compatible with both 2S (8.4V) and 3S (12.6V) lithium battery packs
⚡ QC Fast Charging — Supports Quick Charge input through modern USB Type-C interface
🚀 15W High Power Output — Efficient charging performance for lithium battery applications
🔄 Balanced Charging Technology — Maintains equal voltage across battery cells for longer battery life
💎 94% High Efficiency — Advanced synchronous boost charging minimizes power loss
🛡️ Multiple Safety Protections — Includes overvoltage, undervoltage, overcurrent & short-circuit protection
🎛️ Adjustable Charging Current — Flexible current settings for different battery capacities
⏳ Charging Timeout Protection — Prevents overcharging and enhances battery safety
💡 LED Status Indicators — Easy monitoring of charging and working conditions
📦 Compact & Lightweight Design — Perfect for DIY electronics, robotics, and portable projects
₨ 330 -
Type-C USB Cable High-Speed 3A Fast Charging Durable Copper Core PVC Anti-Tangle Data Sync Cord
- ⚡ 3A Fast Charging – Rapid power delivery for Type-C devices
- 🔄 High-Speed Data Transfer – Smooth syncing and file sharing
- 🧵 Upgraded PVC Body – Strong resistance to pulling and bending
- 🔒 Tangle-Free Design – No knots, no hassle
- 🧲 99.9% Copper Core – Superior conductivity and durability
- 📱 Universal Compatibility – Works with smartphones, tablets, laptops
- 🖥️ Laptop & Phone Sync – Reliable charging and data connection
- 🛡️ Long Lifespan – Built to withstand daily wear
- 🎯 Stable Performance – Consistent charging and transfer speeds
- 🛍️ Shehzad Electronics Quality – Trusted brand assurance
₨ 250 -
UC3843 Current Mode PWM Controller IC – High-Performance Power Supply Controller
-
✅ Current-mode PWM controller
-
✅ Wide input voltage range (7V–40V)
-
✅ High speed with low start-up current (typically 1mA)
-
✅ Excellent line and load regulation
-
✅ Internal under-voltage lockout (UVLO)
-
✅ Soft start and frequency stability
-
✅ DIP-8 or SOP-8 package (depending on version)
-
✅ Ideal for SMPS, DC-DC converters, inverters, and battery chargers
₨ 27 -
-
UC3845 High-Speed PWM Controller IC – Current Mode Controller for SMPS, Inverters & DC-DC Converters
-
✅ Current-mode PWM controller with fast response
-
✅ Wide input voltage: 7V to 30V
-
✅ Low start-up current (0.5 mA typical)
-
✅ High oscillator frequency: up to 500 kHz
-
✅ Built-in UVLO (Under Voltage Lockout)
-
✅ Internal error amplifier and current sense comparator
-
✅ DIP-8 or SOP-8 package
-
✅ Perfect for SMPS, DC-DC converters, UPS, and motor drives
₨ 35 -
-
ULN2003 Darlington Transistor Array IC – High-Current, High-Voltage Driver IC for Motors and Relays
-
✅ Seven NPN Darlington pairs in a single IC
-
✅ High-voltage operation: up to 50V
-
✅ High current handling: up to 500mA per channel
-
✅ Built-in flyback diodes for protection against inductive loads
-
✅ Easy interfacing with low-level logic signals (e.g., microcontrollers)
-
✅ Commonly used in relay drivers, stepper motor control, and other power drivers
-
✅ Available in a 16-pin DIP or SOIC package
-
✅ Ideal for driving motors, relays, solenoids, and high-power actuators
₨ 30 -
-
ULTIMATE 3.7V 7W SUPER BRIGHT COB LED POWER-STRIP
-
☀️ 7W HIGH-DENSITY COB ENGINE: Utilizes a massive array of micro-LED chips under one phosphor layer for extreme brightness and zero “honeycomb” shadows.
-
🔋 3.7V OPTIMIZED VOLTAGE: Specifically calibrated for 18650, Li-Po, and Li-ion batteries, making it the “gold standard” for portable electronics.
-
🌡️ THERMAL EFFICIENCY: Built on a specialized substrate designed to dissipate heat rapidly, ensuring long-lasting performance without brightness decay.
-
📏 ULTRA-COMPACT FORM FACTOR: The slim $70\text{mm} \times 14\text{mm}$ profile allows for seamless integration into flashlights, lanterns, and cabinet trim.
-
🛠️ PLUG-AND-PLAY TERMINALS: Features reinforced, easy-solder contact points clearly labeled for a fail-safe installation experience.
-
⚪ PURE WHITE SPECTRUM: Delivers a crisp, high-CRI white light that enhances visibility and color accuracy in any environmen
₨ 30 -
