- “USB TYPE-C TO DIP ADAPTER BOARD” already exists in your wishlist
-
TO-3P Aluminum Heat Sink – Compact Silver Cooling Solution (23x25x16mm)
-
Material: High-grade Aluminum with Silver Finish
-
Size: 23mm (L) x 25mm (W) x 16mm (H)
-
Compatible Package: TO-3P / TO-220 and similar transistor packages
-
Efficient Cooling: Finned structure for better heat dissipation
-
Pre-drilled Mounting Hole: Easy installation on circuit boards
-
Durable Build: Rust-resistant, lightweight, and solid design
-
Applications: Ideal for amplifiers, power transistors, and DIY electronics projects
₨ 25 -
-
TOSHIBA HEAVY DUTY AAA BATTERIES – | MERCURY & CADMIUM FREE | LONG-LASTING 1.5V POWER Cells
-
✅ HEAVY-DUTY PERFORMANCE: Long-lasting 1.5V power optimized for high-drain devices.
-
🌿 ECO-FRIENDLY: No mercury or cadmium added – safer for your family and the environment.
-
🔋 ALKALINE TECHNOLOGY: Reliable energy with enhanced leakage resistance and voltage stability.
-
📦 BULK VALUE PACK: 20 packs (40 batteries) – perfect for households, offices, and frequent users.
-
🏭 TOSHIBA ORIGINAL JAPAN QUALITY: Backed by a legacy of durability and trust.
-
🔧 VERSATILE USE: Compatible with remotes, toys, flashlights, clocks, and more.
-
📍 EASY REORDER: Use Reorder No. RO3KG(M)SP-2TGTPK for quick and hassle-free restocking.
-
💪 DURABLE SHELF LIFE: Maintains power integrity even under varying storage conditions.
-
🚀 CONSISTENT OUTPUT: Del unwavering voltage until fully depleted.
-
🛡️ SAFE & RELIABLE: Engineered for user and environmental safety.
₨ 43 -
-
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
TPA3110 XH-A232 30W+30W 2.0 Channel Digital Stereo Audio Power Amplifier Board DC 8-26V 3A
- Chip: TPA3110
- Condition:XH-A232
- Supply Voltage:DC8V-26V
- Dissipation Power:30W+30W
- Size:53*45*14mm
- Channels:2 (2.0)
- Output impedance:4-8ohm
- Current: more than 3A
- Signal to noise ratio: 100db
- Weight:21g
₨ 425 -
TPA3116D2 2.1 Channel Bluetooth 5.0 Subwoofer Amplifier Board | 200W HiFi Digital Audio Power Amp 2x50W+100W | X12A-Audio CA-3169B Upgraded Edition
-
🔊 Dual TPA3116 Chips: High-performance digital processing for powerful 50W+50W+100W output.
-
📶 Bluetooth 5.0 Technology: Wireless streaming up to 8 meters with stable, lag-free connectivity.
-
🎛️ 5-Knob Precision Control: Independent knobs for Master Volume, Treble, Bass Volume, Bass Frequency, and Left/Right Balance.
-
🎵 2.1 Channel Surround: Dedicated subwoofer output for deep, immersive low-end performance.
-
🔌 Dual Input Modes: Seamlessly switch between Bluetooth 5.0 and 3.5mm AUX wired input.
-
⚡ High-Efficiency Design: Power-saving circuitry with over 90% efficiency reduces heat and power loss.
-
🛠️ Wide Voltage Range: Flexible power options from DC 12V to 24V (works with laptops or car power).
-
🛡️ Built-in Protection: Engineered to minimize noise, current hum, and interference for clean audio.
-
🔘 Multi-Function Switch: One-touch knob controls playback (Play/Pause) and input mode switching.
-
📦 Ready-to-Use (Finished Board): Pre-assembled PCB; just connect your speakers and power supply to start.
₨ 4,500 -
-
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board – XH-M139 50W × 2 + 100W | DC 12V–24V | Hi-Fi Audio Amplifier Module
-
Model: XH-M139
-
Amplifier Chip: TPA3116D2 × 2
-
Channels: 3 (Left + Right + Bass)
-
Power Supply: DC 12V – 24V
-
Speaker Impedance: 4Ω – 8Ω
-
Signal-to-Noise Ratio: 100dB
-
Frequency Response: 14Hz – 100kHz
-
Switching Frequency: 1.2MHz
-
Material: Electronic Components
-
Board Size: 100 × 80 × 28 mm
-
Weight: 118g
₨ 2,800 -
-
Transparent Mica Sheet TO-3P TO-3Pll D1047 C5200 Insulation Pads heat sink sheet
- Package: TO-3P / TO-3Pll
- Size: 22 x 18 mm/ 20 x 25 mm
- Thickness: 0.12 mm
- Aperture: 3 mm
- Withstand voltage: 5 KV
- Condition: New
₨ 3 – ₨ 4 -
TSOP58238 IR Infrared Receiver High Sensitivity & Low Power
- Operating Voltage: 2.5V – 5.5V
- Carrier Frequency: 38kHz
- Response Time: Fast and accurate IR signal detection
- Ambient Light Resistance: Works well in bright environments
- Applications: Remote controls, automation systems, TVs, set-top boxes, Arduino, Raspberry Pi projects
₨ 15 -
TT Motor single Shaft DC 3V-6V Gear Motor for Smart Car Robot Arduino DIY
✅ Wide Voltage Range: Works efficiently on 3V–6V DC
💪 High Torque: ≥800 gf·cm at 3V for small loads
🚗 Smooth Speed: ~200 RPM at 4.5V, perfect for precise movement
🔌 Low Current Draw: ~170mA at 4.5V, energy-efficient
🌞 Battery & Solar Compatible: Flexible power source options
🤖 EMC Anti-Interference: Safe for microcontrollers and electronics
🛠 Durable & Compact: Fits into tight DIY project spaces
🎯 Versatile Applications: Arduino, smart cars, robots, toys, mini fans
💎 Perfect for Makers: Ideal for students, hobbyists, and tinkerers₨ 150 -
TTP223 Touch Button Module Capacitive Switch Sensor
- Size:11.5*8mm
- Power:2.5-5.5V
- Trigger setting mode:(1- Greater than Short;0- Greater than No Short)
- COLOR:RED
- Material: CCL
- AB=00:No-lock High TTL level ouput;
- AB=01:Self-lock High TTL level ouput;
- AB=10:No-lock Low TTL level ouput;
- AB=11:Self-lock Low TTL level ouput;
₨ 60 -
Type-C USB 2S-3S Lithium Battery Charging Boost Module 15W
🔋 Dual Battery Support — Compatible with both 2S (8.4V) and 3S (12.6V) lithium battery packs
⚡ QC Fast Charging — Supports Quick Charge input through modern USB Type-C interface
🚀 15W High Power Output — Efficient charging performance for lithium battery applications
🔄 Balanced Charging Technology — Maintains equal voltage across battery cells for longer battery life
💎 94% High Efficiency — Advanced synchronous boost charging minimizes power loss
🛡️ Multiple Safety Protections — Includes overvoltage, undervoltage, overcurrent & short-circuit protection
🎛️ Adjustable Charging Current — Flexible current settings for different battery capacities
⏳ Charging Timeout Protection — Prevents overcharging and enhances battery safety
💡 LED Status Indicators — Easy monitoring of charging and working conditions
📦 Compact & Lightweight Design — Perfect for DIY electronics, robotics, and portable projects
₨ 330
