-
5W CREE Super Bright LED Emitter – Premium Warm White
-
🚀 Authentic CREE Technology: Powered by a world-class CREE chip, offering higher luminous efficacy and superior build quality than standard LED emitters.
-
🕯️ Elegant Warm White Glow: Features a 3000K–3200K color temperature, providing a relaxing, warm atmosphere similar to traditional halogen lighting.
-
⚡ High-Efficiency 5W Power: Delivers a powerful, concentrated beam that is perfect for accent lighting, reading lamps, and custom spotlights.
-
🔋 Optimized 3V Performance: Designed for a 2.9V–3.5V range, making it compatible with 18650 Li-ion batteries and standard 3V DC drivers.
-
📏 Precision 20mm Star Base: The 2cm aluminum PCB provides a sturdy foundation for soldering and acts as the primary heat dissipation layer.
-
💎 Water Clear Precision Lens: Features a high-transparency lens that ensures a sharp beam with zero light distortion for maximum clarity.
-
📐 Wide-Beam Distribution: Provides a broad light spread that is excellent for floodlighting and general interior illumination.
-
🛡️ Professional Grade Durability: Engineered for long-term use, maintaining consistent color and brightness even through thousands of hours of operation.
-
🛠️ DIY Ready Design: Marked clearly with (+) and (-) polarity indicators on the board, making it incredibly easy for hobbyists and professionals to wire.
-
🔥 Superior Thermal Management: The high-grade aluminum base is specifically designed to pull heat away from the core to keep the chip running cool.
₨ 50 -
-
9V Battery Cable Plug Clip Jack Connector
- Made of soft leather, sturdy material, durable to use
- 2. I fonts, with red and black connecting lines
- 3. The length of line is about 10cm
- 4. Excellent material, fine workmanship
- 5. It is an environmental 9V battery buckle
- 6. Color: Black Red
- 7. This battery clip can be used to power LEDs or other devices with a 9V battery.
- 8. Sturdy material, durable to use.
- 9. Snap on design, easy to install.
₨ 15 -
3-Pin 125V 6A Toggle Switch | ON–ON 2-Position | Mini Metal Lever Switch
-
✅ Switch Type: ON–ON (2 Position)
-
✅ Rated Voltage & Current: 125V AC, 6A
-
✅ Pin Configuration: 3 Pins (SPDT)
-
✅ Compact Size: 13 x 8 x 10 mm
-
✅ Metal Lever Handle – Durable and responsive
-
✅ Panel Mount Design – Includes nuts and washers
-
✅ Ideal for switching between two outputs or circuits
-
✅ Perfect for DIY electronics, robotics, and control systems
₨ 58 -
-
3 Pins Screw Terminal Block Connector
- Rated voltage: 300V
- Rated curent: 7A
- Insulation resistance: 5000MΩ/1000V
- Withstanding voltage: AC1500V/1Min
- Wire range: 24-18AWG 1mm2
- Temperature range: -40℃ to +105℃
- Maximum Soldering: +250℃, for 5 seconds
- Strip length: 4.5mm to 5.0mm
₨ 20 -
3.7V 8W Super Bright COB LED Strip | Compact 4.5cm x 2cm Module | Energy-Saving Lighting | Long Life
- ⚡ 8W High Output – Bright illumination for clear visibility.
- 🎨 Compact Size – Slim 4.5cm x 2cm design fits anywhere.
- 🛠️ Durable Construction – Strong base ensures long-term use.
- 🔌 Easy Installation – Simple metallic contacts for quick setup.
- 🌍 Energy Efficient – Operates at low voltage (3.7V).
- 🔥 Heat Dissipation – Prevents overheating for extended lifespan.
- 📦 DIY Friendly – Perfect for hobbyists and custom projects.
- 🏠 Versatile Applications – Suitable for homes, offices, and workshops.
- 💡 COB Technology – Uniform light distribution with no dark spots.
- 🏷️ Shehzad Electronics Quality – Trusted brand for reliable lighting.
₨ 30 -
100/76 Gauge Dual Core DC Cable Wire – 1 Meter Length
-
Variants Available: 100/76
-
Length: 1 meter (custom lengths available on request)
-
Conductor Material: China Copper for good conductivity and cost-effectiveness
-
Insulation: Durable PVC coating in red & black for easy polarity identification
-
Flexible & Easy to Install: Suitable for indoor and outdoor applications
-
Usage: Ideal for DC power supply, LED lights, CCTV, automotive, and DIY projects
-
Durability: Resistant to wear, moisture, and environmental factors
₨ 46 -
-
3S 4A 12.6V Lithium Battery Charger Module | USB Type-C to 12.6V Boost Converter for 18650 Li-Ion LiPo Batteries
-
🔋 Supports 3S Li-Ion / LiPo Battery Packs (12.6V charging output)
-
⚡ Input Voltage: DC 3V to 6V (recommended 3.7V–5V)
-
🔌 USB Type-C Input Port for convenient and universal charging
-
📈 High-Efficiency Boost Converter with switching frequency up to 1MHz
-
🧠 Quasi-CV Mode: Compensates for battery and trace resistance
-
🔄 Automatic Recharge when battery voltage drops
-
🔐 Built-in Protection: Over-voltage, short battery, and low-voltage input
-
💡 LED Indicators: “CR” for Charging, “OK” for Fully Charged or Constant Voltage Mode
-
🌡️ Wide Operating Temp: -40℃ to +85℃
-
🛠️ Compact Size: 39mm x 18mm x 6.3mm — ideal for tight DIY spaces
-
⚖️ Lightweight: Only 5g — perfect for portable use
₨ 195 -
-
Soldering Iron Cleaning Sponge 🟡 | Tip Repair & Maintenance | High Absorbency
💧 Pre-Soak Before Use – Expands for optimal cleaning
🛠️ Tip Cleaning Efficiency – Removes solder and residue effectively
🔗 Strong Absorbency – Keeps soldering tips free of oxidation
💎 Durable Material – Long-lasting and reusable
⚡ Maintains Tip Performance – Protects soldering iron tips
📏 Compact Size – Fits any standard soldering station
🎨 Bright Yellow Color – Easy to spot on the workstation
🧪 Antioxidant Friendly – Helps preserve tip quality
🔧 Replacement Sponge – Ideal for worn-out sponges
🔥 Enhances Soldering Precision – Clean tips improve solder joints₨ 30 -
Plastic Enclosure Box for WiFi Power Bank | 6x 18650 Battery Case | DIY Electronics Housing
- Compact Design – Slim profile for easy portability
- Durable Plastic – Strong housing for long-lasting use
- High Capacity – Fits six 18650 cells for extended power
- Easy Assembly – Screw mounts for secure installation
- Removable Lid – Quick access to internal components
- Lightweight Build – Easy to carry anywhere
- Professional Finish – Sleek look for modern electronics
- Versatile Use – Suitable for WiFi power banks and DIY projects
- Safe Housing – Protects batteries and circuits effectively
- Customizable – Perfect for tailored energy solutions
₨ 150 -
Ultra Super Powe 1.5V AA Heavy Duty Batteries with Advanced Manganese Technology
-
⚡ Ultra Super Power: Designed as “Heavy Duty” cells with a high-performance formula to deliver strong, sustained energy, especially in power-hungry devices.
-
🔄 Advanced Manganese Technology: The Manganese Battery construction ensures stable voltage output and improved overall performance throughout the battery’s life.
-
🇯🇵 Japanese Tech Innovation: Incorporates “DOLITRA BALLEY JAPAN TECHNOLOGY”, signifying a commitment to quality, reliability, and advanced engineering.
-
🔋 Ideal for High-Drain Devices: Perfect for devices that require a burst of power, such as digital cameras, gaming gear, and high-lumen torches.
-
⏳ Extended Shelf Life: Holds its charge reliably when stored, so you can stock up and always have fresh power ready for action.
-
🏷️ Trusted Brand: Brought to you by SHEHZAD ELECTRONICS, a reliable name for quality electronic components and power solutions.
-
💰 Excellent Value: Get premium “Heavy Duty” performance at a competitive price, making it a smart choice for both everyday and intensive use.
₨ 16 -
-
5MM Yellow LED Diode super bright Crystal
Diameter: 5mm
Lens Colour : Water Clear
Reverse Current (uA) : <=30
Life Rating : 100,000 Hours
Absolute Maximum Ratings (Ta=25°C)
Max Power Dissipation : 80mw
Max Continuous Forward Current : 30mA
Max Peak Forward Current : 75mA
Reverse Voltage : 5~6V
Lead Soldering Temperature : 240°C (<5Sec)
Operating Temperature Range : -25°C ~ +85°C
Preservative Temperature Range : -30°C ~ +100°C
₨ 3 -
⚡ Universal 1A Battery Charging Module | Micro USB Interface
-
🔌 Micro USB Interface: Features a standard Micro USB input for universal compatibility with common cables.
-
⚡ 1A Fast Charging: Delivers a reliable 1A current to charge 18650 and Li-Po cells efficiently.
-
📐 Ultra-Compact Footprint: Miniature SC-35 design fits into the tightest custom enclosures and DIY projects.
-
🔘 Integrated Control Switch: Includes a built-in tactile push-button for direct on/off or mode control of your device.
-
🛡️ Precision Soldering Pads: Clearly labeled BAT+, BAT-, M+, and M- points for error-free wiring.
-
🎯 Smart Charging Logic: Managed by a dedicated U5 controller chip to regulate power flow during the charge cycle.
-
🛠️ Universal Compatibility: Specifically designed to work with 3.7V Lithium-ion cells and 18650 batteries.
-
🏗️ Robust Circuitry: High-quality surface-mount components (C2, C5, R2) ensure stable and durable performance.
₨ 35 -
