-
Bass Tone Mid & Treble Control β Compact 3-Band EQ with Single Supply Opamp
-
3-Band EQ β Independently adjust Bass, Mid, and Treble for complete tonal control.
-
Single Supply Operation (24V) β Simplifies power needs for versatile applications.
-
Opamp-Based Circuit β Provides clean, low-noise signal processing for professional sound quality.
-
Compact & Durable β Expertly built by Shehzad Electronics for long-lasting reliability.
If you want it formatted with special checkmark bullets, here you go:
β 3-Band EQ β Independently adjust Bass, Mid, and Treble for complete tonal control.
β Single Supply Operation (24V) β Simplifies power needs for versatile applications.
β Opamp-Based Circuit β Provides clean, low-noise signal processing for professional sound quality.
β Compact & Durable β Expertly built by Shehzad Electronics for long-lasting reliability.Would you prefer one style over the other?
₨ 260 -
-
12V Bluetooth Audio Receiver Module β Wireless Music Receiver for Amplifiers & DIY Audio Projects
-
πΉ Operating Voltage: 12V DC
-
πΉ Wireless Audio Streaming via Bluetooth connection
-
πΉ High-Quality Stereo Output for clear and crisp sound
-
πΉ Compact Design β easy to integrate into custom projects
-
πΉ Stable Connection with strong Bluetooth signal range
-
πΉ Low Power Consumption for efficient performance
-
πΉ Plug & Play Operation β simple setup, no programming needed
-
πΉ Compatible with Phones, Laptops & Tablets
-
πΉ Ideal for Amplifiers, Car Audio & Home Audio Systems
-
πΉ Durable PCB Build ensuring long life and reliability
₨ 220 -
-
PAM8610 15W + 15W Two Channel Stereo Class D Amplifier Board
- Supply voltage: DC 7V-15V
- 2. Output power: 10w + 10w (8 load)
- 3. Efficiency: 90%
- 4. Shutdown Current: 4uA
- 5. Quiescent current; 20mA
- 6. SNR: 86%
- 7. Total harmonic distortion: 5W / 1KHz / 8 —- 0.1%
- 8. Frequency range: 20Hz-20KHz
- 9. Input impedance: 15K
- 10. Output Impedance: 8
- 11. Amplifier board size: 30mm * 25mm * 2.5mm
- 1. The power supply voltage limit is 16.5V, do not use more than this voltage.
- 2. The power supply is recommended for 12v, 3A power supply filter better
- 3. 4-8 inch stereo speakers recommended.
- 4. Do not short-circuit the audio output to each other or shorted to ground.
- 5. Carefully check before electricity, ensure wiring is correct before electricity.
₨ 198 -
CA-6928/Gold82d05 Bluetooth Audio Module Board 5V
- Audio Out : Mono L R G (it must be connected to amplifier)
- Receive audio signals from mobile
- Extraordinary Range 10 meters.
- Smallest and Powerful
- Best for any kind of amplifier.
- Dimensions : 24mm x 15mm x 1mm
- Supply: 3.5~5V Dc
- Current; 300ma
- Impedence; 4~8ohms
₨ 185 – ₨ 195 -
TDA2030A 15W Mono Audio Amplifier Board Module
- On-board audio amplifier chip TDA2030A
- Mono 15W Amplifier Circuit Design
- On-board speaker terminal block
- On-board 10K adjustable resistance, you can adjust the amplified volume
- Onboard power indicator
- The main board have pins leads, you can directly input audio signal (GND, IN)
- The working voltage: 6 ~ 15V
- Board size: 32 (mm) x24 (mm)
₨ 195 -
PAM8403 5V Power Audio Amplifier Board Module 2 Channel 3W + 3W Volume Control
- Model: PAM8403 amplifier module.
- With power ON-OFF & volume control button.
- Good sound quality
- Super mini design allows it to be easily placed in a variety of digital products.
- Filterless, Low Quiescent Current and Low EMI
- Can use the computer USB port, USB power bank or a mobile phone charger to supply the 5V support power
- Battery power can also be used 3-5V
- Can provide 3W (left channel) + 3W (right channel) output power into a 4Ξ© or 8Ξ© speaker load and 5V power supply
- CMOS class D amplifier design for high efficiency and low cost
₨ 195 -
LA4440 Stereo Amplifier Board Kit π | 19W+19W BTL | DIY Audio Amplifier (Without ICs)
π Powerful 19W+19W Output β Strong stereo sound performance
π§ BTL Amplifier Design β Enhanced power and efficiency
π High Sound Quality β Clear highs, smooth mids, deep bass
π Low Noise Output β Near-silent background noise
β‘ 12V DC Operation β Ideal for car and portable setups
π οΈ DIY Kit Design β Perfect for electronics enthusiasts
π₯ Stable Performance β No current shock on startup
π’ Wide Speaker Compatibility β Supports 4Ξ© to 8Ξ© speakers
β οΈ Heatsink Required β Ensures safe and long-lasting use
π§ Custom Build Flexibility β Add your own ICs and cooling setup
πΌ Compact Board β Easy to integrate into projects₨ 180 -
UM66 Musical Kit β 12V DC Melody Sound Module β Ideal for Popcorn & Ice Cream Carts
-
π΅ UM66 Melody IC Module β Pre-programmed for music playback
-
π Operating Voltage: 12V DC
-
π High Output Power: 25 watts β Loud enough for open areas
-
π§ No Soldering Needed β Plug-and-play operation
-
π Supports Horn or Speaker for sound output
-
π Compact Size: 3.5 x 3.7 cm β Fits in small spaces
-
π Perfect for Commercial Use β Especially ice cream carts, popcorn stalls, or street vending setups
-
β Reliable and Durable Build β Built to perform in outdoor settings
₨ 160 -
-
Stereo 3-Band EQ Tone Preamp Module π―π΅ | Made in Japan by Alpas | DIY Audio Customization
ποΈ 3-Band Tone Control β Adjustable Bass, Mid, Treble for perfect audio
β‘ Low Power Operation β Runs efficiently at 3V DC
π Premium Japanese Build β Reliable and durable components
π Compact Design (36x31mm) β Fits easily into small enclosures
π§ Easy Integration β Works with most preamps and audio boards
π§ Stereo Output β Optimized for dual-channel audio
π οΈ DIY Friendly β Perfect for hobbyists and audio enthusiasts
π₯ Precise Frequency Adjustment β Fine-tune your sound exactly
π¦ Versatile Applications β Amplifiers, speakers, and audio projects
π¨ Professional-Grade Audio Control β Crisp and clean tone adjustments₨ 150 -
Bass Tone Treble Stereo SK198 Board Volume Control
- Bass Tone Treble kit Volume Control Module
- Better performance, the frequency band is wide and noise is very small
- Sound warm and distorted, high fidelity
- Working Voltage: DC 12V
- Tune type: Low/High Pitch/Balance/Volume
- Channel: Double channel (Stereo)
₨ 140 -
Bass Tone Treble Stereo SK199 Kit Board
- Bass Tone Treble kit Volume Control Module
- Better performance, the frequency band is wide and noise is very small
- Sound warm and distorted, high fidelity
- Working Voltage: DC 12V
- Tune type: Low/High Pitch/Balance/Volume
- Channel: Double channel (Stereo)
₨ 135 -
Bass Tone Treble Control Board | Stereo Volume Controller Module | DC 12V Audio Preamp
- β¨ Full Audio Control β Adjust bass, treble, balance, and volume
- π Stereo Output β Dual channel sound processing
- πΆ High Fidelity Sound β Clear, rich, and natural audio
- β‘ Low Noise Circuit β Minimal distortion and interference
- ποΈ Wide Frequency Range β Better sound tuning flexibility
- π§ DIY Friendly Design β Easy to integrate into projects
- π¦ Compact Size β Fits easily in any audio setup
- π Stable 12V Operation β Reliable performance
- π οΈ Durable Build Quality β Long-lasting usage
- π± Wide Compatibility β Works with amplifiers, speakers, and audio systems
₨ 130
