-
12V AC Op-Amp Bass Mid Treble Tone Control PCB Board | Dual LM358 Preamp Equalizer Board for Home Theater & Audio DIY
-
🔴 12V AC Transformer Ready: Directly connects to standard 12V AC power supply inputs for seamless system integration.
-
🟢 Dual LM358 Architecture: Uses two operational amplifiers to process independent sound frequencies cleanly.
-
🟡 Precision Frequency Control: Fine-tunes bass, midrange, and treble levels for optimal audio balance.
-
🔵 Ultra-Clear Silkscreen: Clearly labeled component positions streamline resistor, capacitor, and IC placement.
-
🟣 Onboard Rectifier Circuit: Features designated slots for 1N4007 diodes and filter capacitors to handle AC power input.
-
🟠 High Signal-to-Noise Ratio: Delivers clean audio pre-amplification with minimal distortion or hum.
-
🟤 Compact Layout: Space-saving footprint fits effortlessly inside amplifier cabinets and project boxes.
-
⚪ Durable Circuit Board: Sturdy board layout built to withstand heat during component assembly.
-
🟦 Universal Audio Compatibility: Connects smoothly between audio input sources and main power amplifier boards.
-
🟩 Ideal for DIY Builders: Perfect foundation for custom sound systems, karaoke setups, and active equalizers.
₨ 75 -
-
400 Watts Outdoor Mono Amplifier PCB – Compact Power for Clear Sound
- High Power Mono Output – Delivers strong, distortion‑free sound.
- Fiber Board Durability – Built to withstand heat and stress.
- Compact Design – Fits easily into amplifier enclosures.
- Outdoor Performance – Ideal for open‑air setups.
- Easy Component Placement – Clearly labeled for quick assembly.
- Stable Current Flow – Ensures consistent audio output.
- Wide Resistor Range – Supports flexible circuit tuning.
- Reliable Transistor Support – Compatible with C5200 and A1943.
- DIY Friendly – Perfect for hobbyists and technicians.
- Trusted Brand – Quality assurance from Shehzad Electronics.
₨ 180 -
High Power Stereo Amplifier PCB – 200W to 400W Fiber Board
- High Power Output – Delivers up to 400 W stereo sound.
- Fiber Board Durability – Heat‑resistant and long‑lasting.
- Easy Assembly Layout – Clearly labeled component positions.
- Wide Transistor Support – Works with multiple transistor models.
- Stable Current Flow – Ensures consistent audio performance.
- Compact Design – Fits neatly into amplifier enclosures.
- Professional Finish – Clean silkscreen labeling for precision.
- Enhanced Audio Clarity – Reduces distortion and noise.
- DIY Friendly – Perfect for hobbyists and engineers.
- Trusted Brand – Quality guaranteed by Shehzad Electronics.
₨ 450 -
High-Performance DC Converter & Power Supply PCBs 12V to ±25V Converter – Shehzad Electronics
- 🌟 Dual Voltage Output – Converts 12V DC into ±25V DC for powerful applications
- 🔋 Stable Power Supply – Smooth, regulated voltage with IC 7815 & IC 7915
- ⚡ High Efficiency – Optimized PCB layout reduces energy loss
- 💡 IC 555 Timer – Precision control for switching and timing
- 🔧 Easy Assembly – Clear silkscreen labels for hassle-free component placement
- 🎛️ Customizable PCB – Flexible design for DIY electronics and prototyping
- 🛡️ Durable Build – Strong material ensures long-lasting performance
- 🔊 Audio Amplifier Ready – Perfect for powering high-quality sound systems
- 🔄 Large Capacitors – 3300µF & 3900µF for smooth filtering
- 🏆 Trusted Brand – Quality assurance from Shehzad Electronics
₨ 225 -
Premium Single-Sided Copper Clad DIY Universal PCB Plate (10×8 Inch)
-
🔴 Premium Single-Sided Copper: Features a clean, uniform copper layer on one side, perfect for smooth etching and reliable soldering.
-
🟢 Generous Sizing: Measures 10 Inch x 8 Inch, providing plenty of surface area for large designs or multiple smaller projects cut from a single sheet.
-
🔵 DIY & Prototyping Ready: Excellent for toner transfer, photoresist, or CNC routing methods to create your own custom circuit boards.
-
🟠 Sturdy Base Material: Built on a durable, heat-resistant laminate backing (marked with “HS” branding as seen in 20260613_220037.jpg) to prevent warping during soldering.
-
🟡 Package Includes: 1x Single-Sided Copper Clad PCB Plate.
₨ 450 -
-
Single Side Copper Clad PCB Board 10×15cm | Universal Circuit Board Plate 1mm
🧩 Single Side Copper Layer – Ideal for simple circuit designs
⚡ Excellent Conductivity – High-quality copper for better performance
📏 Standard Size (10×15cm) – Suitable for multiple applications
🛠 Easy to Cut & Shape – Customize according to your project
🎯 Smooth Surface Finish – Perfect for etching and soldering
🧱 Durable & Strong Board – Long-lasting and reliable
🔧 DIY Friendly – Great for beginners and professionals
🌍 Multi-Purpose Use – Electronics, education, and repair work
💡 Lightweight & Compact – Easy to handle and store₨ 135 -
High-Power 4000W AC 220V Dimmer Motor Speed Controller PCB
-
🚀 Extreme Power Handling: Supports up to 4000W (peak) for heavy-duty appliances.
-
💎 Premium Fiber Material: Built on a high-grade Fiber PCB for superior heat resistance and durability compared to standard boards.
-
🎯 Precision Control: Designed for the BTA16-600 TRIAC to provide flicker-free dimming and smooth motor speed adjustment.
-
📏 Perfect Form Factor: Compact 11.6cm x 9.1cm size with pre-drilled mounting holes for easy installation.
-
🛠️ Clear Component Labeling: Features high-visibility silk-screen printing for easy soldering and assembly of resistors, diodes, and capacitors.
-
🔌 Universal Compatibility: Works seamlessly with 220V AC input for fans, heaters, incandescent bulbs, and AC motors.
₨ 180 -
-
PRO-SERIES 200W D1047 STEREO AMPLIFIER PCB
-
🔊 Dual-Channel Stereo: Complete Left and Right channel amplification on a single, high-quality board.
-
💎 Quad D1047 Power: Utilizes four D1047 NPN transistors for a balanced and punchy output.
-
⚡ 200W Total Power: Delivers 100W per channel, perfect for 8-inch to 10-inch home speakers.
-
📏 Extended PCB Design: Large 14.6cm x 8cm layout provides better airflow and easier soldering.
-
🛠️ Error-Proof Assembly: All component values are printed directly on the board for a “no-manual” assembly experience.
-
🌡️ Integrated Heat Management: Linear transistor alignment allows for direct mounting to a single aluminum heat sink.
-
🔋 Efficient Voltage Range: Optimized for 25V-0-25V AC input, making it compatible with standard 5A-7A transformers.
-
🛡️ Built-in Power Section: Features dedicated slots for large filter capacitors ($4700\mu F$ or higher) for hum-free audio.
-
🔌 Versatile Connectivity: Separate pads for Ground (GND), Speaker Out (SP), and Audio Input (IN) for clean wiring.
₨ 110 -
-
ULTRA-POWER 300W MOSFET MONO AMPLIFIER PCB
-
💎 Dual N-Channel Output: Utilizes two IRF240 MOSFETs for superior current handling and a rich, musical audio signature.
-
⚡ High Power Delivery: Capable of pushing a massive 300 Watts RMS in mono configuration for high-impact sound.
-
🔋 Wide Voltage Range: Optimized for Dual $56V$ DC operation, allowing for maximum dynamic range and headroom.
-
🛠️ User-Friendly Silk Screen: Features ultra-clear component labeling, making it easy for hobbyists to populate and solder with zero errors.
-
🌡️ Advanced Thermal Logic: Designed with dedicated mounting spaces for BD139 and MJE series driver transistors to manage heat effectively.
-
🔊 Subwoofer Ready: The high current output makes it an ideal choice for driving large-diameter subwoofers with tight control.
-
📐 Space-Saving Footprint: The pro-engineered $10\text{cm} \times 9\text{cm}$ PCB fits easily into standard amplifier chassis and heat sinks.
-
🛡️ Premium Build Quality: Manufactured on a high-grade glass epoxy substrate for long-lasting durability and heat resistance.
-
🔌 Flexible Inputs: Includes dedicated pads for Audio Input, Ground, and Speaker Output for clean and easy wiring.
-
🏗️ Heavy-Duty Support: Supports large-wattage ceramic resistors and high-voltage electrolytic capacitors ($80V$) for stable performance.
₨ 150 -
-
High-Fidelity 650W Stereo Power Amplifier DIY Kit – Pro-Grade Dual Rail BJT Design
-
🚀 Peak Output Power: 800 Watts Total (400W + 400W @ 4Ω Load).
-
⚡ Operating Voltage: Dual Rail ±45V to ±70V DC (Symmetrical).
-
🎸 Transistor Tech: Optimized for NPN/PNP Power Pairs (Class AB).
-
🌈 Audio Fidelity: Ultra-low THD (Total Harmonic Distortion) for “Crystal Clear” highs.
-
🛡️ Rugged Build: FR-4 Glass-Epoxy PCB with Extra-Thick Copper Paths.
-
🎧 Channel Layout: True Stereo (Independent Left/Right inputs and outputs).
-
🌡️ Thermal Design: Includes footprints for 0.47Ω 5W Emitter Resistors for heat stability.
-
🎯 Versatility: Perfect for Subwoofers, Floor-standers, or Pro-Audio monitors.
₨ 360 -
-
DIY Bass Treble Tone Control PCB Board – High-Quality Audio Preamp Circuit
-
Complete Tone Control: Includes dedicated mounting points for Bass, Treble, and Balance potentiometers to customize your sound output.
-
Clearly Labeled Silkscreen: All component values (e.g., 1K, 10K, 10uF) and polarities are printed directly on the board for error-free assembly.
-
Standard Component Support: Designed to use common, easy-to-find components like C945 transistors and standard resistors.
-
Dual Input/Output Design: Features designated Input and Output solder pads for easy integration between your audio source and amplifier.
-
Compact JML 09 Design: A space-saving layout that fits easily into custom amplifier chassis or project boxes.
-
Wide Supply Range: Includes a dedicated Supply section (+/-) for powering the preamp circuit.
₨ 50 -
-
Single Side Veroboard – Straight Line Style – 24 Lines (6.5cm x 14.5cm)
-
✅ Board Style: Straight Lines – Ideal for clean and structured circuit routing
-
✅ Lines: 24 Copper Tracks
-
✅ Size: 6.5cm x 14.5cm – Perfect for most prototyping needs
-
✅ Material: Durable FR2 Phenolic Laminate with Single Side Copper Coating
-
✅ Hole Pitch: 2.54mm – Standard spacing for through-hole components
-
✅ Hole Diameter: ~1mm – Fits most component leads
-
✅ Applications: Prototyping, DIY projects, academic experiments, small circuits
-
✅ User-Friendly: Easy to cut, drill, and solder
-
✅ Brand: Shehzad Electronics – Trusted quality for electronics components
₨ 90 -