-
⚡ Universal 1A Battery Charging Module | Micro USB Interface
-
🔌 Micro USB Interface: Features a standard Micro USB input for universal compatibility with common cables.
-
⚡ 1A Fast Charging: Delivers a reliable 1A current to charge 18650 and Li-Po cells efficiently.
-
📐 Ultra-Compact Footprint: Miniature SC-35 design fits into the tightest custom enclosures and DIY projects.
-
🔘 Integrated Control Switch: Includes a built-in tactile push-button for direct on/off or mode control of your device.
-
🛡️ Precision Soldering Pads: Clearly labeled BAT+, BAT-, M+, and M- points for error-free wiring.
-
🎯 Smart Charging Logic: Managed by a dedicated U5 controller chip to regulate power flow during the charge cycle.
-
🛠️ Universal Compatibility: Specifically designed to work with 3.7V Lithium-ion cells and 18650 batteries.
-
🏗️ Robust Circuitry: High-quality surface-mount components (C2, C5, R2) ensure stable and durable performance.
₨ 35 -
-
1S 3.7V 3A BMS PCM battery protection board for 18650 lithium ion li battery
- high-accuracy voltage detection circuit;
- terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
- Over charge voltage: 4.25±0.05V
- Over charge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
- Weight: 10g
₨ 45 -
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
6V 0.45A DC Power Supply Adapter – Efficient AC to DC Wall Charger
-
⚡ Steady Power Delivery: Provides a regulated 6V DC output to protect sensitive electronics.
-
🔋 Efficient 0.45A Current: Specifically rated for 0.45A, making it ideal for low-power devices.
-
🌍 Universal 220V AC Input: Optimized for compatibility with standard 220V AC power grids.
-
🔌 Slim 2-Pin Design: Features a space-saving EU-style 2-pin plug that fits easily into standard wall outlets and power strips.
-
📏 Right-Angle DC Connector: Equipped with a convenient 90-degree L-shaped barrel jack to reduce cable strain in tight spaces.
-
📐 Long Reach Cable: Integrated long, flexible power cord allows for easy positioning of your devices.
-
🛡️ Lightweight & Portable: Compact, durable housing makes it easy to carry for travel or move between rooms.
-
🖤 Sleek Black Finish: Designed with a professional, robust matte black casing.
₨ 95 -
-
5V 2A Dual USB Power Bank Module – DIY Charging Board
-
🔌 Dual USB Output Ports – Charge two devices at once with 5V 2A total output
-
🔋 Battery Compatibility – Supports 3.7V lithium-ion and polymer batteries (including 18650 cells)
-
🛡️ Safety Protection Built-In – Overcharge, over-discharge, short-circuit, and overcurrent protection
-
⚙️ Compact Design – Easy to install in custom enclosures or DIY power bank cases
-
💡 Low Power Consumption – Efficient design for long battery life
-
📏 Approximate Size – 68mm × 30mm × 12mm
-
🔧 User-Friendly Setup – No soldering required for basic installation
₨ 110 -
-
2S 3A BMS Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection Board
✅ Supports 2S (7.4V) Li-ion / Li-Po Battery Packs
✅ Overcharge Protection: 4.25V – 4.35V ±0.05V
✅ Over-Discharge Protection: 2.3V – 3.0V ±0.05V
✅ Continuous Current: 3A | Peak Current: 5A
✅ Short-Circuit Protection: Auto Recovery Supported
✅ Ultra-Low Standby Current: <3µA for Long Life
✅ MOSFET Controlled Charging & Discharging
✅ Compact Design, Easy to Install
✅ Operating Temp: -40°C to +50°C₨ 110 -
Dual USB Power Bank Module 5V 2A – Reliable Charging Circuit
-
🔌 Dual USB Output Ports – Charge two devices simultaneously with a total 5V/2A output
-
🔋 Battery Compatibility – Works with 3.7V lithium-ion and polymer batteries (18650, flat cells, etc.)
-
💡 LED Battery Level Indicator – 4-stage display shows real-time battery charge status
-
🛡️ Built-in Protection Circuitry – Prevents overcharge, over-discharge, over-current, and short-circuit
-
⚙️ Compact PCB Design – Easy to fit into custom cases or enclosures (Approx. 68×30×12mm)
-
🧠 Auto Power-Off Feature – Shuts down intelligently when not in use
-
🧰 Plug-and-Play Setup – No soldering required; quick battery terminal connection
-
🔧 Perfect for DIY & Learning – Ideal for electronics students, makers, and repair professionals
₨ 115 -
-
Dual USB 5V 2A Power Bank Charging Module – 18650 Battery Compatible | Shehzad Electronics
-
🔌 Dual USB Output (5V/2A) – Charge two devices at once
-
🔋 Battery Compatible: 18650 & Polymer Lithium (3.2V – 4.2V)
-
💡 4-Level LED Battery Indicator – Know your power level
-
🛡️ Built-in Protection: Overcharge, Over-discharge, Over-current
-
⚡ Smart Auto Power Off – Saves energy when idle
-
🔧 Micro USB Input Port – Supports 5V input (Recommended: 5V/1A or higher)
₨ 120 -
-
Power Bank Module – 5V 2A Dual USB
-
🔌 Dual USB Ports: Charge two devices at once with 5V 2A output
-
⚡ Stable Performance: Delivers consistent power without fluctuations
-
📏 Compact Design: Space-saving module for easy integration in DIY projects
-
🛠️ Durable Construction: Built with high-quality components for long-term use
-
🔧 Easy to Install: Simple wiring for quick and hassle-free setup
-
🛡️ Safety Features: Built-in protection against overcharge, over-discharge, and short circuit
-
💡 LED Indicators: 4-level LED lights to display battery charge level
₨ 120 -
-
5V 2A Dual USB Power Bank Module – DIY Charging Board | Reliable & Compact
-
Dual USB output ports (5V/2A shared) – charge two devices at once
-
Compatible with 3.7V–5V lithium-ion and polymer batteries (e.g., 18650)
-
Built-in protection against overcharge, over-discharge, and short-circuit
-
Compact and lightweight PCB (approx. 68mm × 30mm × 12mm)
-
Energy-efficient design for extended battery life
-
Simple wiring – ideal for DIY users, students, and repair technicians
-
Suitable for custom power banks, portable chargers, and electronics projects
₨ 120 -
