-
β‘ Universal 1A Battery Charging Module | Micro USB Interface
-
π Micro USB Interface: Features a standard Micro USB input for universal compatibility with common cables.
-
β‘ 1A Fast Charging: Delivers a reliable 1A current to charge 18650 and Li-Po cells efficiently.
-
π Ultra-Compact Footprint: Miniature SC-35 design fits into the tightest custom enclosures and DIY projects.
-
π Integrated Control Switch: Includes a built-in tactile push-button for direct on/off or mode control of your device.
-
π‘οΈ Precision Soldering Pads: Clearly labeled BAT+, BAT-, M+, and M- points for error-free wiring.
-
π― Smart Charging Logic: Managed by a dedicated U5 controller chip to regulate power flow during the charge cycle.
-
π οΈ Universal Compatibility: Specifically designed to work with 3.7V Lithium-ion cells and 18650 batteries.
-
ποΈ Robust Circuitry: High-quality surface-mount components (C2, C5, R2) ensure stable and durable performance.
₨ 35 -
-
1S 3.7V 3A BMS PCM battery protection board for 18650 lithium ion li battery
- high-accuracy voltage detection circuit;
- terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
- Over charge voltage: 4.25Β±0.05V
- Over charge release voltage:4.23Β±0.05V
- Over discharge voltage:2.54Β±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
- Weight: 10g
₨ 45 -
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
2S 3A BMS Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection Board
β Supports 2S (7.4V) Li-ion / Li-Po Battery Packs
β Overcharge Protection: 4.25V β 4.35V Β±0.05V
β Over-Discharge Protection: 2.3V β 3.0V Β±0.05V
β Continuous Current: 3A | Peak Current: 5A
β Short-Circuit Protection: Auto Recovery Supported
β Ultra-Low Standby Current: <3Β΅A for Long Life
β MOSFET Controlled Charging & Discharging
β Compact Design, Easy to Install
β Operating Temp: -40Β°C to +50Β°C₨ 110 -
BMS 2S 7.4V 8A Lithium Battery Protection Board β High Accuracy & Safe Charging
-
π’ High-accuracy voltage detection β Keeps your batteries safe & efficient
-
π΄ 3-stage over-current protection β Over-current 1, Over-current 2 & Short circuit
-
π‘ MOSFET control β Smooth and safe charge/discharge
-
π΅ Super low standby current β Less than 5Β΅A for long-term storage
-
π£ Works in extreme temperatures β From -40Β°C to +50Β°C
-
π Compact & durable β 38Γ8Γ2 mm, resistance < 300mΞ©, lifespan 50,000+ hours
-
β‘ Repairable short circuit protection β Safe recovery after faults
₨ 140 -
-
BMS 3S 12V 10A Lithium Battery Protection Board β Smart Balancing, Overcharge & Short-Circuit Safety by Shehzad Electronics
- π Lithium Battery Safety β Protects against overcharge & discharge.
- β‘ 10A High Current β Handles powerful loads with ease.
- π‘οΈ Short-Circuit Protection β MOSFET-based safety design.
- π§ Easy Wiring Setup β Clear B+, B1, B2, Bβ labels.
- π Compact PCB Board β Fits tight enclosures.
- π Cell Balancing β Equalizes voltage across cells.
- π Extended Battery Life β Improves durability.
- π Versatile Applications β Perfect for solar, e-bikes, DIY packs.
- 𧩠BT-C6 Chipset β Precision monitoring & control.
- π·οΈ Shehzad Electronics Quality β Trusted brand reliability.
₨ 185 -
3S 4A 12.6V Lithium Battery Charger Module | USB Type-C to 12.6V Boost Converter for 18650 Li-Ion LiPo Batteries
-
π Supports 3S Li-Ion / LiPo Battery Packs (12.6V charging output)
-
β‘ Input Voltage: DC 3V to 6V (recommended 3.7Vβ5V)
-
π USB Type-C Input Port for convenient and universal charging
-
π High-Efficiency Boost Converter with switching frequency up to 1MHz
-
π§ Quasi-CV Mode: Compensates for battery and trace resistance
-
π Automatic Recharge when battery voltage drops
-
π Built-in Protection: Over-voltage, short battery, and low-voltage input
-
π‘ LED Indicators: “CR” for Charging, “OK” for Fully Charged or Constant Voltage Mode
-
π‘οΈ Wide Operating Temp: -40β to +85β
-
π οΈ Compact Size: 39mm x 18mm x 6.3mm β ideal for tight DIY spaces
-
βοΈ Lightweight: Only 5g β perfect for portable use
₨ 195 -
-
BMS 2S 20A 7.4V Li-Ion Battery Protection Board with Balance Function π
-
β‘ High-Level Protection: Protects against short-circuits, over-charge, over-discharge, and over-current.
-
π Balance Function: Maintains perfect charge balance between cells for longer battery life.
-
π High Current Capability: Supports max working current 20A, over-current protection up to 25A.
-
π‘ Wide Temperature Range: Works in -10Β°C to 50Β°C environments.
-
π‘ Ultra-Low Power Draw: Static current <18Β΅A, ensuring minimal energy loss.
-
π Compact & Easy to Install: Size 48.4 Γ 20.1 Γ 4mm, perfect for all DIY lithium battery projects.
-
β Safe & Reliable: Low internal resistance (<7mΞ©) for stable performance.
₨ 199 -
-
6S 24V 12A BMS Protection Board π§ | 18650 Lithium Battery Pack Safety Module
π Complete Battery Protection β Overcharge, over-discharge, short circuit & overcurrent
β‘ High Current Support β Up to 15A continuous, 25A peak
π Stable & Reliable β Ensures safe battery operation
π Compact Size β Easy to fit in battery packs
π₯ Low Internal Resistance β Efficient power flow (β€20mΞ©)
π‘οΈ Smart Protection System β Automatic cut-off and recovery
π§ Wide Temperature Range β Works from -30Β°C to +80Β°C
β‘ Low Power Consumption β Ultra-low standby current
π οΈ Durable Build Quality β Long-lasting and reliable performance
πΌ Perfect for DIY & Professional Use β Ideal for battery projects₨ 320 -
Type-C USB 2S-3S Lithium Battery Charging Boost Module 15W
π Dual Battery Support β Compatible with both 2S (8.4V) and 3S (12.6V) lithium battery packs
β‘ QC Fast Charging β Supports Quick Charge input through modern USB Type-C interface
π 15W High Power Output β Efficient charging performance for lithium battery applications
π Balanced Charging Technology β Maintains equal voltage across battery cells for longer battery life
π 94% High Efficiency β Advanced synchronous boost charging minimizes power loss
π‘οΈ Multiple Safety Protections β Includes overvoltage, undervoltage, overcurrent & short-circuit protection
ποΈ Adjustable Charging Current β Flexible current settings for different battery capacities
β³ Charging Timeout Protection β Prevents overcharging and enhances battery safety
π‘ LED Status Indicators β Easy monitoring of charging and working conditions
π¦ Compact & Lightweight Design β Perfect for DIY electronics, robotics, and portable projects
₨ 330
