-
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
1S 3.7V 3A BMS PCM battery protection board for 18650 lithium ion li battery
- high-accuracy voltage detection circuit;
- terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
- Over charge voltage: 4.25Β±0.05V
- Over charge release voltage:4.23Β±0.05V
- Over discharge voltage:2.54Β±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
- Weight: 10g
₨ 45 -
3S 4A 12.6V Lithium Battery Charger Module | USB Type-C to 12.6V Boost Converter for 18650 Li-Ion LiPo Batteries
-
π Supports 3S Li-Ion / LiPo Battery Packs (12.6V charging output)
-
β‘ Input Voltage: DC 3V to 6V (recommended 3.7Vβ5V)
-
π USB Type-C Input Port for convenient and universal charging
-
π High-Efficiency Boost Converter with switching frequency up to 1MHz
-
π§ Quasi-CV Mode: Compensates for battery and trace resistance
-
π Automatic Recharge when battery voltage drops
-
π Built-in Protection: Over-voltage, short battery, and low-voltage input
-
π‘ LED Indicators: “CR” for Charging, “OK” for Fully Charged or Constant Voltage Mode
-
π‘οΈ Wide Operating Temp: -40β to +85β
-
π οΈ Compact Size: 39mm x 18mm x 6.3mm β ideal for tight DIY spaces
-
βοΈ Lightweight: Only 5g β perfect for portable use
₨ 195 -
-
β‘ Universal 1A Battery Charging Module | Micro USB Interface
-
π Micro USB Interface: Features a standard Micro USB input for universal compatibility with common cables.
-
β‘ 1A Fast Charging: Delivers a reliable 1A current to charge 18650 and Li-Po cells efficiently.
-
π Ultra-Compact Footprint: Miniature SC-35 design fits into the tightest custom enclosures and DIY projects.
-
π Integrated Control Switch: Includes a built-in tactile push-button for direct on/off or mode control of your device.
-
π‘οΈ Precision Soldering Pads: Clearly labeled BAT+, BAT-, M+, and M- points for error-free wiring.
-
π― Smart Charging Logic: Managed by a dedicated U5 controller chip to regulate power flow during the charge cycle.
-
π οΈ Universal Compatibility: Specifically designed to work with 3.7V Lithium-ion cells and 18650 batteries.
-
ποΈ Robust Circuitry: High-quality surface-mount components (C2, C5, R2) ensure stable and durable performance.
₨ 35 -
-
2S 3A BMS Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection Board
β Supports 2S (7.4V) Li-ion / Li-Po Battery Packs
β Overcharge Protection: 4.25V β 4.35V Β±0.05V
β Over-Discharge Protection: 2.3V β 3.0V Β±0.05V
β Continuous Current: 3A | Peak Current: 5A
β Short-Circuit Protection: Auto Recovery Supported
β Ultra-Low Standby Current: <3Β΅A for Long Life
β MOSFET Controlled Charging & Discharging
β Compact Design, Easy to Install
β Operating Temp: -40Β°C to +50Β°C₨ 110 -
BMS 2S 7.4V 8A Lithium Battery Protection Board β High Accuracy & Safe Charging
-
π’ High-accuracy voltage detection β Keeps your batteries safe & efficient
-
π΄ 3-stage over-current protection β Over-current 1, Over-current 2 & Short circuit
-
π‘ MOSFET control β Smooth and safe charge/discharge
-
π΅ Super low standby current β Less than 5Β΅A for long-term storage
-
π£ Works in extreme temperatures β From -40Β°C to +50Β°C
-
π Compact & durable β 38Γ8Γ2 mm, resistance < 300mΞ©, lifespan 50,000+ hours
-
β‘ Repairable short circuit protection β Safe recovery after faults
₨ 140 -
-
3S 12V 100A BMS Li-ion Lithium Battery Protection Circuit Board Li-polymer Balance Charging Module
-
π΄ Massive 100A Capacity: Handles extreme over-discharge and over-charge currents.
-
π Precision Balancing: Integrated 60mA balance current keeps all cells synchronized.
-
π‘ Triple-Mode Flexibility: Designed for 3S but easily adaptable for 4S and 5S setups.
-
π’ Smart Thermal Port: Includes a dedicated temperature control interface for heat safety.
-
π΅ Instant Shortage Protect: Shuts down faults in a staggering 100-600 microseconds.
-
π£ High-Current Stability: Supports a steady 80A contact discharge for heavy loads.
-
βͺ Intelligent Recovery: Features “Off-load release” mode to safely restore power after a trip.
-
π€ Disconnect Protection: Built-in safeguards against accidental wire disconnection.
- e.
₨ 595 -
-
HighβPower 3S 60A 12V Lithium Battery Protection Board | Smart BMS with Balancing | Shehzad Electronics
- π High Current 60A β Supports powerful motors and devices.
- β‘ Smart Overcharge Protection β Keeps cells safe at 4.2V max.
- π‘οΈ OverβDischarge Guard β Prevents deep drain damage.
- π Auto Cell Balancing β Equalizes voltage across all cells.
- π‘οΈ Temperature Safety β Protects against overheating.
- π Compact Design β Fits easily into battery packs.
- π§ Easy Wiring β Clearly labeled terminals for quick setup.
- π’ Energy Efficiency β Reduces power loss during operation.
- π Durable Build β Long lifespan with quality components.
- π EcoβFriendly Solution β Extends battery life, reducing waste.
₨ 360 -
BMS 2S 20A 7.4V Li-Ion Battery Protection Board with Balance Function π
-
β‘ High-Level Protection: Protects against short-circuits, over-charge, over-discharge, and over-current.
-
π Balance Function: Maintains perfect charge balance between cells for longer battery life.
-
π High Current Capability: Supports max working current 20A, over-current protection up to 25A.
-
π‘ Wide Temperature Range: Works in -10Β°C to 50Β°C environments.
-
π‘ Ultra-Low Power Draw: Static current <18Β΅A, ensuring minimal energy loss.
-
π Compact & Easy to Install: Size 48.4 Γ 20.1 Γ 4mm, perfect for all DIY lithium battery projects.
-
β Safe & Reliable: Low internal resistance (<7mΞ©) for stable performance.
₨ 199 -
-
BMS 3S 40A 12.6V Li-ion Lithium Battery Protection & Charging Board β For 18650/26650/Polymer Batteries
- β‘ High Discharge Capability: Supports up to 40A continuous discharge
- π Safe Charging: Supports up to 20A continuous charging
- β Battery Protection: Prevents overcharge, over-discharge, and short circuits
- βοΈ Balance Version: Maintains each cell at proper voltage
- π₯ Thermal Protection: Automatically discharges if single cell exceeds 4.2V
- π οΈ Wide Compatibility: Works with 18650, 26650, and polymer lithium batteries
- ποΈ High-Power Drill Support: Can handle β€ 170W drills with proper batteries
- π§° Enhanced Version: Compact size for tight installations
- β οΈ Strict Wiring Protocol: Connect 0V, 4.2V, 8.4V, 12.6V exactly as diagrammed
- π‘ LED/Resistor Monitoring: 430 resistor heats to discharge overvoltage safely
- π DIY & Industrial Use: Ideal for custom battery packs, e-bikes, tools, and robotics
- π‘οΈ Durable Design: High-quality PCB ensures long life under high current conditions
₨ 350
