-
TP4056 Type-C Lithium Battery 18650 Charger Module 1A With Battery Protection Type C BMS
- The input voltage: 4.35-6 v (recommended voltage 5 v)
- Charge cut-off voltage: 4.2 V + / – 1%
- Maximum charging current output: 1000 ma
- The battery overcharge protection voltage: 4.28 V
- Battery overcharge lifting voltage: 4.00 V
- The battery discharge protection voltage: 3.0 V
- Battery discharge termination voltage: 3.2 V
- Battery: over-current protection current 3 a
- The board size: about 2.5 * 1.65 CM
- Light state: no load the light not bright, red light for recharging, is full of green light.
₨ 55 -
3S 4A 12.6V Lithium Battery Charger Module | USB Type-C to 12.6V Boost Converter for 18650 Li-Ion LiPo Batteries
-
🔋 Supports 3S Li-Ion / LiPo Battery Packs (12.6V charging output)
-
⚡ Input Voltage: DC 3V to 6V (recommended 3.7V–5V)
-
🔌 USB Type-C Input Port for convenient and universal charging
-
📈 High-Efficiency Boost Converter with switching frequency up to 1MHz
-
🧠 Quasi-CV Mode: Compensates for battery and trace resistance
-
🔄 Automatic Recharge when battery voltage drops
-
🔐 Built-in Protection: Over-voltage, short battery, and low-voltage input
-
💡 LED Indicators: “CR” for Charging, “OK” for Fully Charged or Constant Voltage Mode
-
🌡️ Wide Operating Temp: -40℃ to +85℃
-
🛠️ Compact Size: 39mm x 18mm x 6.3mm — ideal for tight DIY spaces
-
⚖️ Lightweight: Only 5g — perfect for portable use
₨ 195 -
-
1S 3.7V 3A BMS PCM battery protection board for 18650 lithium ion li battery
- high-accuracy voltage detection circuit;
- terminal of the charger using high voltage device;
- Built-in three-stage over-current detection circuit (over-current 1, over-current 2, load short circuit);
- MOS transistor can control the battery charge and discharge;
- Over charge voltage: 4.25±0.05V
- Over charge release voltage:4.23±0.05V
- Over discharge voltage:2.54±0.1V
- Maximal continuous charging current: 2A
- Maximal continuous Discharging current: 2A
- Over current protection: 3A
- Size: L40*W4*T3mm
- Weight: 10g
₨ 45 -
⚡ Universal 1A Battery Charging Module | Micro USB Interface
-
🔌 Micro USB Interface: Features a standard Micro USB input for universal compatibility with common cables.
-
⚡ 1A Fast Charging: Delivers a reliable 1A current to charge 18650 and Li-Po cells efficiently.
-
📐 Ultra-Compact Footprint: Miniature SC-35 design fits into the tightest custom enclosures and DIY projects.
-
🔘 Integrated Control Switch: Includes a built-in tactile push-button for direct on/off or mode control of your device.
-
🛡️ Precision Soldering Pads: Clearly labeled BAT+, BAT-, M+, and M- points for error-free wiring.
-
🎯 Smart Charging Logic: Managed by a dedicated U5 controller chip to regulate power flow during the charge cycle.
-
🛠️ Universal Compatibility: Specifically designed to work with 3.7V Lithium-ion cells and 18650 batteries.
-
🏗️ Robust Circuitry: High-quality surface-mount components (C2, C5, R2) ensure stable and durable performance.
₨ 35 -
-
BMS 2S 7.4V 8A Lithium Battery Protection Board – High Accuracy & Safe Charging
-
🟢 High-accuracy voltage detection – Keeps your batteries safe & efficient
-
🔴 3-stage over-current protection – Over-current 1, Over-current 2 & Short circuit
-
🟡 MOSFET control – Smooth and safe charge/discharge
-
🔵 Super low standby current – Less than 5µA for long-term storage
-
🟣 Works in extreme temperatures – From -40°C to +50°C
-
🟠 Compact & durable – 38×8×2 mm, resistance < 300mΩ, lifespan 50,000+ hours
-
⚡ Repairable short circuit protection – Safe recovery after faults
₨ 140 -
-
3S 12V 100A BMS Li-ion Lithium Battery Protection Circuit Board Li-polymer Balance Charging Module
-
🔴 Massive 100A Capacity: Handles extreme over-discharge and over-charge currents.
-
🟠 Precision Balancing: Integrated 60mA balance current keeps all cells synchronized.
-
🟡 Triple-Mode Flexibility: Designed for 3S but easily adaptable for 4S and 5S setups.
-
🟢 Smart Thermal Port: Includes a dedicated temperature control interface for heat safety.
-
🔵 Instant Shortage Protect: Shuts down faults in a staggering 100-600 microseconds.
-
🟣 High-Current Stability: Supports a steady 80A contact discharge for heavy loads.
-
⚪ Intelligent Recovery: Features “Off-load release” mode to safely restore power after a trip.
-
🟤 Disconnect Protection: Built-in safeguards against accidental wire disconnection.
- e.
₨ 595 -
-
BMS 2S 20A 7.4V Li-Ion Battery Protection Board with Balance Function 🔋
-
⚡ High-Level Protection: Protects against short-circuits, over-charge, over-discharge, and over-current.
-
🔄 Balance Function: Maintains perfect charge balance between cells for longer battery life.
-
🔋 High Current Capability: Supports max working current 20A, over-current protection up to 25A.
-
🌡 Wide Temperature Range: Works in -10°C to 50°C environments.
-
💡 Ultra-Low Power Draw: Static current <18µA, ensuring minimal energy loss.
-
🛠 Compact & Easy to Install: Size 48.4 × 20.1 × 4mm, perfect for all DIY lithium battery projects.
-
✅ Safe & Reliable: Low internal resistance (<7mΩ) for stable performance.
₨ 199 -
-
High‑Power 3S 60A 12V Lithium Battery Protection Board | Smart BMS with Balancing | Shehzad Electronics
- 🔋 High Current 60A – Supports powerful motors and devices.
- ⚡ Smart Overcharge Protection – Keeps cells safe at 4.2V max.
- 🛡️ Over‑Discharge Guard – Prevents deep drain damage.
- 🔄 Auto Cell Balancing – Equalizes voltage across all cells.
- 🌡️ Temperature Safety – Protects against overheating.
- 🚀 Compact Design – Fits easily into battery packs.
- 🔧 Easy Wiring – Clearly labeled terminals for quick setup.
- 🟢 Energy Efficiency – Reduces power loss during operation.
- 🏆 Durable Build – Long lifespan with quality components.
- 🌍 Eco‑Friendly Solution – Extends battery life, reducing waste.
₨ 360 -
2S 3A BMS Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection Board
✅ Supports 2S (7.4V) Li-ion / Li-Po Battery Packs
✅ Overcharge Protection: 4.25V – 4.35V ±0.05V
✅ Over-Discharge Protection: 2.3V – 3.0V ±0.05V
✅ Continuous Current: 3A | Peak Current: 5A
✅ Short-Circuit Protection: Auto Recovery Supported
✅ Ultra-Low Standby Current: <3µA for Long Life
✅ MOSFET Controlled Charging & Discharging
✅ Compact Design, Easy to Install
✅ Operating Temp: -40°C to +50°C₨ 110 -
BMS 3S 40A 12.6V Li-ion Lithium Battery Protection & Charging Board – For 18650/26650/Polymer Batteries
- ⚡ High Discharge Capability: Supports up to 40A continuous discharge
- 🔋 Safe Charging: Supports up to 20A continuous charging
- ✅ Battery Protection: Prevents overcharge, over-discharge, and short circuits
- ⚖️ Balance Version: Maintains each cell at proper voltage
- 🔥 Thermal Protection: Automatically discharges if single cell exceeds 4.2V
- 🛠️ Wide Compatibility: Works with 18650, 26650, and polymer lithium batteries
- 🏋️ High-Power Drill Support: Can handle ≤ 170W drills with proper batteries
- 🧰 Enhanced Version: Compact size for tight installations
- ⚠️ Strict Wiring Protocol: Connect 0V, 4.2V, 8.4V, 12.6V exactly as diagrammed
- 💡 LED/Resistor Monitoring: 430 resistor heats to discharge overvoltage safely
- 🌍 DIY & Industrial Use: Ideal for custom battery packs, e-bikes, tools, and robotics
- 🛡️ Durable Design: High-quality PCB ensures long life under high current conditions
₨ 350
